Китай
Бизнес в Китае
Мини - заводы из Китая от компании MEGA POWER Hong Kong Croup Limited


Методы испытания физическо-химических свойств металлов

Содержание:
20 Методы испытания физическо-химических свойств металлов - общее
21 Методы испытания механических свойств металлов
22 Методы испытания физических свойств металлов
23 Методы испытания эффективности металлов
24 Методы испытания металлографической фазы
25 Методы испытания химических свойств металлов
26 Методы испытания неразрушимых металлов

H20 GB/T 2975 - 1998 钢及钢产品力学性能试验取样位置及试样制备
Steel and steel products-Location and preparation of test pieces for mechanical testing
H20 GB/T 5058 - 1985 钢的等温转变曲线图的测定方法(磁性法)
Steel-Determination of isothermal transformation diagram-Magnetic method
H21 GB/T 351 - 1995 金属材料电阻系数测量方法
Metallic materials-Resistively measurement method
H21 GB/T 1423 - 1996 贵金属及其合金密度的测试方法
Method of measurement of density for precious metals and their alloys
H21 GB/T 1424 - 1996 贵金属及其合金材料电阻系数测试方法
Method of measurement of resistively of precious metals and their alloys
H21 GB/T 1425 - 1996 贵金属及其合金熔化温度范围的测定 热分析试验方法
Determination of melting temperature range for precious metals and their alloys-Testing method of thermal analysis
H21 GB/T 1479 - 1984 金属粉末松装密度的测定第一部分漏斗法
Metallic powders-Determination of apparent density-Part 1:Funnel method
H21 GB/T 1480 - 1995 金属粉末粒度组成的测定干筛分法
Determination of particle size for metallic powders-Dry sieving
H21 GB/T 1482 - 1984 金属粉末流动性的测定标准漏斗法(霍尔流速计)
Metallic powders-Determination of flow ability by Means of a calibratedfunnel (Hallflowraeter)
H21 GB/T 1550 - 1997 非本征半导体材料导电类型测试方法
Standard methods for measuring conductivity type of extrinsic semiconducting materials
H21 GB/T 1551 - 1995 硅、锗单晶电阻率测定直流两探针法
Test method for resistively of silicon and germanium bars using a two-point probe
H21 GB/T 1552 - 1995 硅、锗单晶电阻率测定直排四探针法
Test method for measuring resistively of monocrystal silicon and germanium with a collinear four-probe array
H21 GB/T 1553 - 1997 硅和锗体内少数载流子寿命测定光电导衰减法 I
Standard test methods for minority carrier lifetime in bulk germanium and silicon by measurement of
Photoconductivity decay
H21 GB/T 1555 - 1997 半导体单晶晶向测定方法
Test methods for determining the orientation of a semiconductor single crystal
H21 GB/T 1557 - 1989 硅晶体中间隙氧含量的红外吸收测量方法
The method of determining interstitial oxygen content in silicon by infrared absorption
H21 GB/T 1558 - 1997 硅中代位碳原子含量红外吸收测量方法
Test method for substitution atomic carbon content of siliconbyinfrared absorption
H21 GB/T 2105 - 1991 金属材料杨氏模量、切变模量及泊松比测量方法(动力学法)
Metallic material-Standard test method for the Young’s modulus, shear modulus and Poison’s ratio (Dynamic method)
H21 GB/T2522 - 1988 电工钢片(带)层间电阻、涂层附着性、叠装系数测试方法
Magnetic sheet and strip-Methods of measurement of interlamination resistance and lamination factor and coat adhesiveness
H21 GB/T 2523 - 1990 冷轧薄钢板(带)表面粗糙度测量方法
Cold rolled sheet(strip)一Measuring method for surface roughness
H21 GB/T 2596 - 1981 钨粉、碳化钨粉比表面积(平均粒度)测定(简化氮吸附法)
Tungsten powder and tungsten carbide powder-Determination of specific surface product(average grainine)一Simplified nitrogen absorption method
H21 GB/T 3170.1 - 1982 铝粉粒度的测定机械振动筛分法
Determination of particle size of aluminum powder-Mechanical vibration sieve method
H21 GB/T 3170.2 - 1982 铝粉粒度的测定风力手动筛分法
Determination of particle size of aluminium powder-Manual-air-blowing sieve method
H21 GB/T 3170.3 - 1982 铝粉粒度的测定乙醇筛洗法
Determination of particle size of aluminium powder-Sieve analysis with alcohol
H21 GB/T 3171.1 - 1982 铝粉松装密度的测定漏斗法
Determination of apparent density of aluminium powder-Funnel method
H21 GB/T 3171.2 - 1982 铝粉松装密度的测定容量计法
Determination of apparent density of aluminium powder-Volumeter method
H21 GB/T 3172 - 1982 铝粉附着率的测定钢片试验法
Determination of adhesion ratio of aluminium powder-Steel plate method
H21 GB/T 3173 - 1982 铝粉盖水面积的测定
Determination of coating surface of aluminium powder on water
H21 GB/T 3248 - 1982 铜、镍及其合金电阻系数测定方法
Determining method of resistively of copper, nickel and their alloys
H21 GB/T 3249-1982 难熔金属及化合物粉末粒度的测定方法费氏法
Standard method for determination of particle size of powders of refractory metals and compounds-Fisher method
H21 GB/T 3651-1983 金属高温导热系数测量方法
Measuring method for thermal conductivity of metal at high temperature
H21 GB/T3655-2000 用爱泼斯坦方圈测量电工钢片(带)磁性能的方法
Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame
H21 GB/T 3656-1983 电工用纯铁磁性能测量方法
Measurement methods of magnetic properties of electrical iron
H21 GB/T 3657-1983 软磁合金直流磁性能测量方法
Measurement method of direct magnetic properties of soft magnetic alloys
H21 GB/T 3658-1990 软磁合金交流磁性能测量方法
Soft magnetic alloys-Measuring method for alternative magnetic properties
H21 GB/T 4059-1983 硅多晶气氛区熔磷检验方法
Polycrystalline silicon-Examination method - Zone-melting on phosphorus under controlled atmosphere
H21 GB/T 4060-1983 硅多晶真空区熔基硼检验方法
Polycrystalline silicon-Examination method-Vacuum zone-melting on boron
H21 GB/T 4067-1999 金属材料电阻温度特征参数的测定
Testing method for electrical resistance-temperature characteristic parameters of metallic materials
H21 GB/T 4104-2003 直接法氧化锌白度(颜色)检验方法
Leucoscopic method for testing whiteness of zinc oxide made by direct process
H21 GB/T 4106-1983 钨丝二次再结晶温度测量方法
Determination method for secondary recrystallization temperature of tungsten wire
H21 GB/T 4107-2004 镁粉松装密度的测定斯科特容量法
Determination of apparent density of magnesium powder-Scott volumetric method
H21 GB/T 4108-2004 镁粉和铝镁合金粉粒度组成的测定于筛分法
Magnesium powder and aluminium-magnesium alloy powder determination of particle size-Dry sieving method
H21 GB/T 4192-1984 电真空器件及电光源用钨、钼材料电阻率的测试方法
Method for the determination of the resistively of tungsten and molybdenum used in electric light sources and vacuum tubes
H21 GB/T 4193-1984 电真空器件及电光源用细钨丝、钼丝和薄带密度的测试方法
Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and nacuumtubes
H21 GB/T 4195 - 1984 钨、钼粉末粒度分布测试方法(沉降天平法)
Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles
H21 GB/T 4196 - 1984 钨、钼条密度测定方法
Method for testing the density of tungsten and molybdenum bars
H21 GB/T 4326 - 1984 非本征半导体单晶霍尔迁移率和霍尔系数测量方法
Extrinsic semiconductor single crystals-measurement of Hall mobility and Hall coefficient
H21 GB/T 4339 - 1999 金属材料热膨胀特征参数的测定
Testing method for thermal expansion characteristic parameters of metallic materials
H21 GB/T 5026 - 1985 软磁合金振幅磁导率测量方法
The measurement method of amplitude permeability of soft magnetic alloys
H21 GB/T 5027 - 1999 金属薄板和薄带塑性应变比(r值)试验方法
Metallic materials – Steel and strip - Determination of plastic strain ratio(r-values)
H21 GB/T 5163 - 1985 可渗性烧结金属材料密度的测定
Permeable sintered metal materials - Determination of density
H21 GB/T 5164 - 1985 可渗性烧结金属材料开孔率的测定
Permeable sintered metal materials - Determination of open porosity
H21 GB/T 5165 - 1985 可渗性烧结金属材料含油率的测定
Permeable sintered metal materials-Determination of oil content
H21 GB/T 5166 - 1998 烧结金属材料和硬质合金弹性模量测定
Sintered metal materials and hard metals-Determination of Young’s mod~ns
H21 GB/T 5167 - 1985 烧结金属材料和硬质合金电阻率的测定
Sintered metal materials and hard metals-Determination of electrical resistivity
H21 GB/T 5225 - 1985 金属材料定量相分析x射线衍射K值法
Metal materials-quantitative phase analysis-Value K"method of X-ray diffraction
H21 GB/T 5249 - 1985 可渗透性烧结金属材料气泡试验孔径的测定
Permeable sintered metal materials-Determination of bubble test pore size
H21 GB/T 5250 - 1993 可渗透烧结金属材料流体渗透性的测定
Permeable sintered metal materials-Determination of fluid permeability
H21 GB/T 5252 - 1985 锗单晶位错腐蚀坑密度测量方法
Germanium monocrystal-Inspection of dislocatiov etch pit density
H21 GB/T 5985-2003 热双金属弯曲常数测量方法
Test method for specific flexivity constant of thermo-stat metals
H21 GB/T 5986-2000 热双金属弹性模量试验方法
Test method for modulus of elasticity of thermostat metals
H21 GB/T 5987 - 1986 热双金属温曲率试验方法
Test method for flexivity of thermostat metals
H21 GB/T 6146 - 1985 精密电阻合金电阻率测试方法
Test method for resistively of precision resistance alloys
H21 GB/T 6147 - 1985 精密电阻合金热电动势率测试方法
Test method for thermoelectric power of precision resistance alloys
1-121 GB/T 6148 - 1985 精密电阻合金电阻温度系数测试方法
Test method for temperature-resistance coefficient of precision resistance alloys
H21 GB/T 6524-2003 金属粉末粒度分布的测量重力沉降光透法
Metallic powders-Determination of particle size distribution by gravitational sedimentationin aliquidand attenuation measurement
H21 GB/T 6525 - 1986 烧结金属材料室温压缩强度的测定
Sintered metal materials-Determination of compression strength at room temperature
H21 GB/T 6526 - 1986 自熔合金粉末固.液相线温度区间的测定方法
Self-fluxing alloy powders-Determination of solidusliquidus temperature range
H21 GB/T 6616-1995 半导体硅片电阻率及硅薄膜薄层电阻测定非接触涡流法
Test method for measuring resistively of semiconductor silicon or sheet resistance of semiconductor films with a noncontact eddy-current gage
H21 GB/T 6617 - 1995 硅片电阻率测定扩展电阻探针法
Test method for measuring resistivity of silicon wafers using spreading resistance probe
H21 GB/T 6618 - 1995 硅片厚度和总厚度变化测试方法
Test method for thickness and total thickness variation of silicon slices
H21 GB/T 6619 - 1995 硅片弯曲度测试方法
Test methods for bow of silicon slices
H21 GB/T 6620 - 1995 硅片翘曲度非接触式测试方法
Test method for measuring warp on silicon slices by noncontact scanning
H21 GB/T 6621 - 1995 硅抛光片表面平整度测试方法
Test methods for surface flamess of silicon polished slices
H21 GB/T 6624 - 1995 硅抛光片表面质量目测检验方法
Standard method for measuring the surface quality of polished silicon slices by visual inspection
H21 GB/T 6803 - 1986 铁素体钢的无塑性转变温度落锤试验方法
Standard method for conducting drop-weight test to determine inductility transition temperature of ferritic steels
H21 GB/T 8359 - 1987 高速钢中碳化物相的定量分析x射线衍射仪法
Carbides in high speed steel-Quantitative phase analysis - Method of X-ray diffractometer
H21 GB/T 8360 - 1987 金属点阵常数的测定方法x射线衍射仪法
The lattice constant determination of metals - Method of X-ray diffractometer
H21 GB/T 8362 - 1987 钢中残余奥氏体定量测定x射线衍射仪法
Retained anstenite in steel-Quantitative determination-Method of X-ray diffractometer
H21 GB/T 8364-2003 热双金属比弯曲试验方法
Test method for specific thermal deflection of thermo-stag metals
H21 GB/T 8643-2002 含润滑剂金属粉末中润滑剂含量的测定修正的索格利特(Soxhlet)萃取法
Lubricated metal-powder mixes-Determination of lubricant content-Modified Soxhlet extraction method
H21 GB/T 8754 - 1988 铝及铝合金阳极氧化 应用击穿电位测定法检验绝缘性
Anodizing of ahmfinium and aluminium alloys-Insulation check by measurement of breakdown potential
H21 GB/T 8757 - 1988 砷化镓中载流子浓度等离子共振测量方法
Determination of carrier concentration in gamum arsenide by the plasma resonance minimum
H21 GB/T 8758 - 1988 砷化镓外延层厚度红外干涉测量方法
Measuring thickness of epitaxial layers of gallium arsenide by infrared interference
H21 GB/T 8761 - 1988 氧化钇、氧化铕粒度分布测定光透沉降法
Determination of particle size distribution of yttrium oxide and europium oxide by sedimentation and light obscuration method
H21 GB/T 8763 - 1988 非蒸散型吸气材料及制品吸气性能测试方法
Test methods of gas absorption characteristic for non-evaporation gettering materials and products
H21 GB/T 10122 - 1988 铁矿石(烧结矿、球团矿) 物理试验用试样的取样和制样方法
Iron ores(sinter and pellets)一Sampling and sample preparation for physical testing
H21 GB/T 10129 - 1988 电工钢片(带)中频磁性能测量方法
Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
H21 GB/T 10562 - 1989 金属材料超低膨胀系数测定方法光干涉法
Metallic material-Standard test method for the extra-low expansion coefficient-Light interferometer method
H21 GB/T 11068 - 1989 砷化镓外延层载流子浓度电容一电压测量方法
Gallium arsenide epitaxial layer-Determination of carrier concentration-Voltage-capacitance method
H21 GB/T 11073 - 1989 硅片径向电阻率变化的测量方法
Standard method for measuring radial resistively variation on silicon sIices
H21 GB/T 11107 - 1989 金属及其化合物粉末 比表面积和粒度测定 空气透过法
Metallic and i协compound powder-Determination of specific surface and particle size by air permeating method
H21 GB/T 11108 - 1989 硬质合金热扩散率的测定方法
Test method for thermal diffusivity of hardmetal (carbide)
H21 GB/T 11110 - 1989 铝及铝合金阳极氧化 阳极氧化膜的封孔质量的测定方法导纳法
Anodizing of aluminium and its alloys - Determination of quality of sealed anodic oxide coatings-Admit-tance method
H21 GB/T 11111 - 1989 钨丝电阻连续测量方法
Continual determination method of electric resistance for tungsten wires
H21 GB/T 11112 - 1989 有色金属大气腐蚀试验方法
Non-ferrous metals atmospheric corrosion testing method
H21 GB/T 12966 - 1991 铝合金电导率涡流测试方法
The method for electrical conductivity measurement of aluminium alloys byuse of eddy current
H21 GB/T 12967.1 - 1991铝及铝合金阳极氧化用喷磨试验仪测定阳极氧化膜的平均耐磨性
Anodizing of aluminium and aluminium alloys - Measurement of mean specific adrasion resistance of anodic oxidation coatings with an adrasive jet test apparatus
H21 GB/T 12967.2 - 1991铝及铝合金阳极氧化用轮式磨损试验仪测定阳极氧化膜的耐磨性和磨损系数
Anodizing of aluminium and aluminium alloys - Measurement of weal resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
H21 GB/T 12967.3 - 1991铝及铝合金阳极氧化氧化膜的铜加速醋酸盐雾试验 (CASS试验)
Anodizing of aluminium and aluminium alloys - Cop-per accelerated acetic acid salt spray test for anodic oxide coatings(CASS test)
H21 GB/T 12967.4 - 1991铝及铝合金阳极氧化着色阳极氧化膜耐紫外光性能
的测定
Anodizing of aluminium and aluminium alloys - Determination ofthefastnessto ultravioletlight ofcoloured anodic oxide coatings
H21 GB/T 12967.5 - 1991铝及铝合金阳极氧化用变形法评定阳极氧化膜的抗破裂性
Anodizing of aluminium and aluminium alloys - Assessment of resistance of anodic oxide coatings to cracking by deformation
H21 GB/T 12968 - 1991 纯金属电阻率与剩余电阻比涡流衰减测量方法
Eddy current decay method for measurement of resistivity and residual resistance ratio of pure metals
H21 GB/T 12969.1 - 1991钛及钛合金管材超声波检验方法
Method of ultrasonic testing for titanium and titanium alloy tubes
H21 GB/T 12969.2 - 1991钛及钛合金管材涡流检验方法
Method of eddy current testing for titanium and titaniuin alloy tubes
H21 GB/T 13012 - 1991 钢材直流磁性能测量方法
Solid steels-Methods of measurement of the d.c. magnetic properties
H21 GB/T 13220 - 1991 细粉末粒度分布的测定声波筛分法
Determination of particle size distribution of fine Dowder-Method of sieve classification with sonic wave
H21 GB/T 13300 - 1991 高电阻电热合金快速寿命试验方法
High resistance alloys for electrical heating-Testing method for accelerated life
H21 GB/T 13301 - 1991 金属材料电阻应变灵敏系数试验方法
Metais-Testing method for sensitivity of electrical resistance strain .
H21 GB/T 13303 - 1991 钢的抗氧化性能测定方法
Steels-Determination method of oxidation resistance
H21 GB/T 13387 - 1992 电子材料晶片参考面长度测量方法
Test method for measuring flat length on slices of electronic materials
H21 GB/T 13388 - 1992 硅片参考面结晶学取向X射线测量方法
Method for measuring crystaUographic orientation of fiats on single crystal silicon slices and wafers by X-ray techniques
H21 GB/T 13389 - 1992 掺硼掺磷硅单晶电阻率与掺杂剂浓度换算规程
Practice for conversion between resistivity and dopant density for boron-doped and phosphorus-doped silicon
H21 GB/T 13390 - 1992 金属粉末比表面积的测定氮吸附法
Metallic powder-Determination of the specific surface area-Method of nitrogen absorption
H21 GB/T 13448 - 1992 彩色涂层钢板及钢带试验方法
Test methods for colour-coated steel plates and strips
H21 GB/T 13789 - 1992 单片电工钢片带磁性能测量方法
Magnetic sheet and strip-Methods of measurement of magnetic properties by means of a single sheet tester
H21 GB/T 14140.1 - 1993硅片直径测量方法光学投影法
Silicon slices and wafers - Measuring of diameter-Optical projecting method
H21 GB/T 14140.2 - 1993硅片直径测量方法千分尺法
Silicon slices and wafers - Measuring of diameter-Micrometer method
H21 GB/T 14141 - 1993 硅外延层、扩散层和离子注入层薄层电阻的测定直排四探针法
Test method for sheet resistance of silicon epitaxial. diffused and ion-implanted layers using a collinear four-probe array
H21 GB/T 14146 - 1993 硅外延层载流子浓度测定汞探针电容-电压法
Silicon epitaxial layers-Determination of carrier concentration-Mercury probe Valtage-capacitance method


H21 GB/T 14201 - 1993 铁矿球团抗压强度测定方法
Iron ore pellets-Determination of crushing strength
H21 GB/T 14202 - 1993 铁矿石(烧结矿、球团矿)容积密度测定方法
Iron ores(sinter and peUets)一Determination of bulk density
H21 GB/T 14453 - 1993 金属材料高温弹性模量测量方法圆盘振子法
Metallic material-Standard test method for the elastic modulus at high temperature-The method of disc-Vibrator
H21 GB/T 14847 - 1993 重掺杂衬底上轻掺杂硅外延层厚度的红外反射测量方法
Test method for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance
H21 GB/T 15077 - 1994 贵金属及其合金材料几何尺寸测量方法
Geometric size measuring methods of precious metals and their alloy materials
H21 GB/T 15078 - 1994 贵金属电触点材料接触电阻的测量方法
Measuring method for contact resistance of precious metal electrical contact materials
H21 GB/T 15250 - 1994 压电铌酸锂单晶体声波衰减测试方法
Test method for bulk acoustic wave attenuation of piezoelectric lithium niobate crystals
H21 GB/T 16596 - 1996 确定晶片坐标系规范
Specification for establishing a wafer coordinate system
H21 GB/T 17103 - 1997 金属材料定量极图的测定
Metal material-Quantitative pole figure preparing method
H21 GB/T 17170 - 1997 非掺杂半绝缘砷化镓单晶深能级EL2浓度红外吸收测试方法
Test method for deep level EL2 concentration of undoped semlinsulating monocrystal gallium arsenide by measurement infra-red absorption method
H21 GB/T 17473.2 - 1998厚膜微电子技术用贵金属浆料测试方法细度测定
Test methods of precious metal pastes used for thick film microelectronics - Determination of fineness
H21 GB/T 17473.3 - 1998厚膜微电子技术用贵金属浆料测试方法方阻测定
Test methods of precious metal pastes used for thick film microelectronics-Determination of sheet resistance
H21 GB/T 18036-2000 铂铑热电偶细丝的热电动势测量方法
The test method of thermo emf for platinum rhodium thermocouple thin wires
H21 GB/T 19289-2003 电工钢片(带)的密度、电阻率和叠装系数的测量方法
Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
H22 GB/T 228-2002 金属材料室温拉伸试验方法
Metallic materials-Tensile testing at ambient temperature
H22 GB/T 229 - 1994 金属夏比缺口冲击试验方法
Metallic materials-Charpy notch impact test
H22 GB/T 230.1-2004 金属洛氏硬度试验第l部分:试验方法(A、B、c、D、E、F、G、H、K、N、T标尺)
Metallic Rockwell hardness test-Part 1:Test method (scales A, B, C, D, E, F, G, H, K, N, T)
H22 GB/T 230.2-2002 金属洛氏硬度试验第2部分:硬度计(A、B、C、D、E、F、G、H、K、N、T标尺)的检验与校准
Metallic rockwell hardness test-Part 2:Verification and calibration of hardness testers(A, B, C, D, E, F, G, H, K, N, T)
H22 GB/T 230.3-2002 金属洛氏硬度试验第3部分:标准硬度块(A、B、C、D、E、F、G、H、K、N、T标尺)的标定
Metallic rockwell hardness test-Part 3:Calibration of hardness reference blocks(scales A, B, C, D, E, F, G, H, K, N, T)
H22 GB/T 231.1-2~2 金属布氏硬度试验第l部分:试验方法
Metallic materials-Brinell hardness test-Partl:Test method
H22 GB/T 231.2-2002 金属布氏硬度试验第2部分:硬度计的检验与校准
Metallic brinell hardness test - Part 2:Verification and calibration ofhardness testers
H22 GB/T 231.3-2002 金属布氏硬度试验第3部分:标准硬度块的标定
Metallic brinell hardness test-Part 3:Calibration of hardness reference blocks
H22 GB/T 238-2002 金属材料线材反复弯曲试验方法
Metallic materials-Wire-Reverse bend test
H22 GB/T 1172 - 1999 黑色金属硬度及强度换算值
Conversion of hardness and strength for ferrous metal
H22 GB/T 1817 - 1995 硬质合金常温冲击韧性试验方法
Test method of impact toughness of cemented car-bides at room temperature
H22 GB/T 2038 - 1991 金属材料延性断裂韧度如试验方法
Metallic materials - Standard test method for car-measure of ductile fracture toughness
H22 GB/T 2039 - 1997 金属拉伸蠕变及持久试验方法
Metallic materials - Creep and stress-rupture test in tension
H22 GB/T 2107 - 1980 金属高温旋转弯曲疲劳试验方法
Metal material-Twisting fatigue test
H22 GB/T 3075 - 1982 金属轴向疲劳试验方法
Method of axial force controlled fatigue testing of metals
H22 GB/T 3252 - 1982 铝及铝合金铆钉线与铆钉剪切试验方法
Aluminium and aluminium alloys-Shear test method for rivet wire and rivets
H22 GB/T 3771 - 1983 铜合金硬度与强度换算值
Conversion of hardness and strength for copper alloys



H22 GB/T 4105 - 1983 钨丝下垂试验方法
Test method for sag of tungsten wire
H22 GB/T 4157 - 1984 金属抗硫化物应力腐蚀开裂恒负荷拉伸试验方法
Sustained load tensile test method of metals for resistance to sulfide stress corrosion cracking
H22 GB/T 4158 - 1984 金属艾氏冲击试验方法
The izod impact test on metals
H22 GB/T 4160-2004 钢的应变时效敏感性试验方法(夏比冲击法)
Steel-strain ageing sensibility test(Charpy impact method)
H22 GB/T 4161 - 1984 金属材料平面应变断裂韧度墨。试验方法
Standard test method for plane-strain fracture tough-ness of metallic materials
H22 GB/T 4337 - 1984 金属旋转弯曲疲劳试验方法
Metals-Rotating barbending fatigue testing
H22 GB/T4338 - 1995 金属材料高温拉伸试验
Metallic materials-Tensile testing at elevated temperature
H22 GB/T 4340.1 - 1999 金属维氏硬度试验第1部分:试验方法
Metallic Vickers hardness test-Part 1:Test method
H22 GB/T 4340.2 - 1999 金属维氏硬度试验第2部分:硬度计的检验
Metallic Vickers hardness test-Part 2:Verification of hardness testers
H22 GB/T 4340.3 - 1999 金属维氏硬度试验第3部分:标准硬度块的标定
Metallic Vickers hardness test-Part 3:Calibration of hardness reference blocks
H22 GB/T 4341-2001 金属肖氏硬度试验方法
Metallic materials - Shore hardness test
H22 GB/T 5028 - 1999 金属薄板和薄带拉伸应变硬化指数(佗值)试验方法
Metallic materials - Sheet and strip-Determination of tensile strain hardening exponent(n-values)
H22 GB/T 5617 - 1985 钢的感应淬火或火焰淬火后有效硬化层深度的测定
Determination of effective depth of hardening after induction or flame hardening of steel
H22 GB/T 6396 - 1995 复合钢板力学及工艺性能试验方法
Clad plates-Mechanical and technological test
H22 GB/T 6398-2000 金属材料疲劳裂纹扩展速率试验方法
Standard test method for fatigue crack growth rates of metallic materials
H22 GB/T 6400 - 1986 金属丝材和铆钉的高温剪切试验方法
High temperature shear test method for metals wires and rivets
H22 GB/T 7314 - 1987 金属压缩试验方法
Metallic materials-Compression testing
H22 GB/T 7963 - 1987 烧结金属材料(不包括硬质合金) 拉伸试样
Sintered metal materials(excluding hard metal)一Tensile test pieces



H22 GB/T 7964 - 1987 烧结金属材料(不包括硬质合金) 室温拉伸试验
Sintered metal materials(excluding hard metal)Tension testing at room temperature
H22 GtVT 7997 - 1987 硬质合金维氏硬度试验方法
Hard metals-Vickers hardness test
H22 GB/T 8653 - 1988 金属杨氏模量、弦线模量、切线模量和泊松比试验方法 (静态法)
Metallic materials-Determination of Young’s modulns, chord modulns, tangent modulus and Poisson’s ratio(statically method)
H22 GB/T 10120 - 1996 金属应力松弛试验方法
Metallic materials-Stress relaxation test
H22 GB/T 10128 - 1988 金属室温扭转试验方法
Metallic materials-Torsion test at room temperature
H22 GB/T 10622 - 1989 金属材料滚动接触疲劳试验方法
Metallic materials-Rolling contact fatigue test
H22 GB/T 10623 - 1989 金属力学性能试验术语
Metallic materials-Terms of mechanical test
H22 GB/T 12347 - 1996 钢丝绳弯曲疲劳试验方法
Steel wire rope-Bending fatigue testing
H22 GB/T 12443 - 1990 金属扭应力疲劳试验方法
Metallic materials-Torsional stress fatigue testing
H22 GB/T 12778 - 1991 金属夏比冲击断口测定方法
Metallic materials - Determination of Charpy impact fracture surface
H22 GB/T 13239 - 1991 金属低温拉伸试验方法
Metallic materials-Tensile testing at low temperatures
H22 GB/T 14452 - 1993 金属弯曲力学性能试验方法
Metallic materials-Oetermination of bending mechanical properties
H22 GB/T 15248 - 1994 金属材料轴向等幅低循环疲劳试验方法
The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials
H22 GB/T 16825.1-2002静力单轴试验机的检验第1部分:拉力和(或)压力试验机测力系统的检验与校准
Verification of static uniaxial testing machines - Part 1:Tension/compression testing machines-Verifica-tion and calibration of the force-measuring system
1-122 GB/T 17394 - 1998 金属里氏硬度试验方法
Metallic materials-Leeb hardness test
H22 GB/T 17473.4 - 1998厚膜微电子技术用贵金属浆料测试方法附着力测定
Test methods of precious metal pastes used for thick film microelectronics - Determination of adhesion
H22 GB/T 17473.5 - 1998厚膜微电子技术用贵金属浆料测试方法粘度测定
Test methods of precious metal pastes used for thick film microelectronics - Determination of viscosity
H22 GB/T 17600.1 - 1998钢的伸长率换算第l部分:碳素钢和低合金钢
Steel - Conversion of elongation values - Part 1:Carbonan dlow alloy steels
H22 GB/T 17600.2 - 1998钢的伸长率换算第2部分:奥氏体钢
Steel - Conversion of elongation values - Part 2:Aus-tenitic steels
H22 GB/T 18449.1-2001金属努氏硬度试验第1部分:试验方法
Metallic knoop hardness test - Part l:Test method
H22 GB/T 18449.2-2001金属努氏硬度试验第2部分:硬度计的检验
Metallic knoop hardness test-Part 2:Verification of hardness testers
H22 GB/T 18449.3-2001金属努氏硬度试验第3部分:标准硬度块的标定
Metallic knoop hardness test-Part 3:Calibration of hardness reference blocks
H23 GB/T 225 - 1988 钢的淬透性末端淬火试验方法
Steel-hardenability test by end quenching(Jominytest)
H23 GB/T 232 - 1999 金属材料弯曲试验方法
Metallic materials-Bend test
H23 GB/T 235 - 1999 金属材料厚度等于或小于3mm薄板和薄带 反复弯曲试验方法
Metallic materials - Sheet and strip 3mm thick or less-Reverse bend test
H23 GB/T 239 - 1999 金属线材扭转试验方法
Metallic materials-Wire-Torsion test
H23 GB/T 241 - 1990 金属管液压试验方法
Metal tubes-Hydrostatic pressure testing
H23 GB/T 242 - 1997 金属管扩口试验方法
Metallic materials-Tube-Drift expanding test
I-123 GB/T 244 - 1997 金属管弯曲试验方法
Metallic materials-Tube-Bend test
H23 GB/T 245 - 1997 金属管卷边试验方法
Metallic materials-Tube-Fhngting test
H23 GB/T 246 - 1997 金属管压扁试验方法
Metallic materials-Tube-Flattening test
H23 GB/T 1814 - 1979 钢材断口检验法
Inspection method for steel work fractures
H23 GB/T 2971 - 1982 碳素钢和低合金钢断口检验方法
Method of fracture test for carbonan dlow alloy steels
H23 GB/T 3246.1-2000 变形铝及铝合金制品显微组织检验方法
Wrought aluminium and aluminium alloys products inspection method for structure
H23 GB/T 3246.2-2000 变形铝及铝合金制品低倍组织检验方法
Wrought alumimum and aluminium alloys products inspection method for macrostructure
H23 GB/T 3488 - 1983 硬质合金显微组织的金相测定
Hard metals-Metallographic determination of micro-structure
H23 GB/T 3489 - 1983 硬质合金孔隙度和非化合碳的金相测定
Hard metals-Metallographic determination of porosity and unconlbiIIed carbon


H23 GB/T 4194-1984 钨丝蠕变试验、高温处理及金相检查方法
Creep test ingjhigh temperature treatment and metal-lographic examination of the tungsten wires
H23 GB/T 4197-1984 钨钼及其合金的烧结坯条、棒材晶粒度测试方法
Method for measuring the average grain size of sintered bar and rod of tungsten molybdenum and alloys
H23 GB/T 4236-1984 钢的硫印检验方法
Steel-Examination by sulphur print(Baumann method)
H23 GB/T 4335-1984 低碳钢冷轧薄板铁素体晶粒度测定法
Cold rolled low-carbon steel sheet-Ferrite grain size-Test methods
H23 GB/T 4462-1984 高速工具钢大块碳化物评级图
Standard figure of coarse carbide of high speed tool steel
H23 GB/T 5168-1985 两相钛合金高低倍组织检验方法
a-B Titanium alloys-Examination of structure
H23 GB/T 5778-1986 膨胀合金气密性试验方法
Determination of hermeticity of expansion alloys
H23 GB/T6401-1986 铁素体奥氏体型双相不锈钢中a一相面积含量金相测定法
Micrographic method for determining area fraction of the a-phases using charts in ferritic-austenitic stain-less steels
H23 GB/T 7732-1987 金属板材表面裂纹断裂韧度墨Kic试验方法
Standard test method for surface-crack fracture toughness Kic of metallic plates
H23 GB/T 7733-1987 金属旋转弯曲腐蚀疲劳试验方法
Metals-rotating bar bending corrosion fatigue testing
H23 GB/T 8358-1987 钢丝绳破断拉伸试验方法
Method of breaking tensile test for steel wire ropes
H23 GB/T 8368-1987 铁素体钢落锤撕裂试验方法
Metallic materials-Drop-weight tear tests of ferritic steels
H23 GB/T 8640-1988 金属热喷涂层表面洛氏硬度试验方法
Thermal sprayed metallic coatings-Rockwell hard-ness test
H23 GB/T 8641-1988 热喷涂层抗拉强度的测定
Thermal sprayed coatings-Determination of tensile strength
H23 GB/T 10561-1989 钢中非金属夹杂物显微评定方法
Steel-Determinationofcontentofnon-metallicinclu-sion-Micrographic method using standa diagrams
H23 GB/T 10573-1989 有色金属细丝拉伸试验方法
Tensile testing method for fine wire of non-ferrous metals
H23 GB/T 11105-1989 金属粉末压坯的拉托拉试验
Metallic powder-Rattler test for the green compacts
H23 GB/T 11106 - 1989 金属粉末用圆柱形压坯的压缩测定压坯强度的方法
Metallic powder-Determination of green strength by compression of cylinder compacts
H23 GB/T 12444.1 - 1990金属磨损试验方法MM型磨损试验
Metallic materials-Wear tests-MM mode wear test
H23 GB/T 12444.2 - 1990金属磨损试验方法环块型磨损试验
Metallic materials-Wear tests-Block-on-ring wear test
H23 GB/T 13222 - 1991 金属热喷涂层剪切强度的测定
Thermal sprayed metallic coatings-Determination of shear strength
H23 GB/T 13665 - 1992 金属阻尼材料阻尼本领试验方法 扭摆法和弯曲共振法
Test method for damping capacity of metal icdamping materials-Torsion pendulum method and flexural resonance method
H23 GB/T 15615 - 1995 硅片抗弯强度测试方法
Test method for measuring flexure strength of silicon slices
H23 GB/T 17104 - 1997 金属管管环拉伸试验方法
Metallic materials-Tube-ring tensile test
H23 GB/T 17473.6 - 1998厚膜微电子技术用贵金属浆料测试方法分辨率测定
Test methods of precious metal pastes used for thick film microelectronics-Determination of resolution
H23 GB/T 17473.7 - 1998厚膜微电子技术用贵金属浆料测试方法可焊性、耐焊性试验
Test methods of precious metal pastes used for thick film microelectronics - Test of solderability and sold-erleaching resistance
H24 GB/T 224 - 1987 钢的脱碳层深度测定法
Determination of depth of decarburization of steel
H24 GB/T 226 - 1991 钢的低倍组织及缺陷酸蚀检验法
Etch test for macrostructure and defect of steels
H24 GB/T 227 - 1991 工具钢淬透性试验方法
Tool steel-method of hard enability test
H24 GB/T 1979-2001 结构钢低倍组织缺陷评级图
Standard diagrams for macrosucture and defect of structural steels
H24 GB/T 5193 - 1985 钛及钛合金加工产品超声波探伤方法
Method of ultrasonic inspection for wrought titanium and titanium alloys products
H24 GB/T 5616 - 1985 常规无损探伤应用导则
Guldlines for application of conventional non destructive testing methods
H24 GB/T 6394-2002 金属平均晶粒度测定法
Metal-methids for estimating the average grain size
H24 GB/T 8651-2002 金属板材超声板波探伤方法
Metal plates - Flaw detection method by the ultrasonic plate wave
H25 GB/T 5776 - 1986 金属材料在表面海水中常规暴露腐蚀试验方法
Method for surface seawater exposure corrosion tests of metallic materials
H25 GB/T 7998 - 1987 铝合金晶间腐蚀测定方法
The method for determining the intergranular eorrosion of aluminium alloy
H25 GB/T 8015.1 - 1987 铝及铝合金阳极氧化膜厚度的试验方法重量法
Test methods for thickness of anodic oxidation coatings On aluminium and aluminium alloys - Gravimetric method
H25 GB/T8015.2 - 1987 铝及铝合金阳极氧化膜厚度的试验方法 分光束显微法
Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys-Split-beam microscope method
H25 GB/T 8650 - 1988 管线钢抗阶梯型破裂试验方法
Test method of pipeline steels for resistance to step wise cracking
H25 GB/T 10123-2001 金属和合金的腐蚀基本术语和定义
Corrosion of metals and alloys - Basic terms and definitions
H25 GB/T 10126-2002 铁一铬一镍合金在高温水中应力腐蚀试验方法
Fe-Cr-Ni alloys-stress corrosion test in high temperature water
H25 GB/T 10127-2002 不锈钢三氯化铁缝隙腐蚀试验方法
Ferric chloride crevice corrosion test of stainless steels
H25 GB/T 11261 - 1989 高碳铬轴承钢化学分析法脉冲加热惰气熔融-红外线吸收法测定氧量
Methods for chemical analysis of high carbon chromiuin beming steel-Thepulse heating inert gas fusion-infra-red absorption method for the determination of oxygen content
H25 GB/T 13312 - 1991 钢铁件涂装前除油程度检验方法 (验油试纸法)
The standard method of identification of degreasing degree on the steel surfaces before covering organic coatings(Test paper method)
H25 GB/T 14165 - 1993 黑色金属室外大气暴露试验方法
Ferrous metals-Test method of atmospheric expo-sure
H25 GB/T 15260 - 1994 镍基合金晶间腐蚀试验方法
Nickel-based alloys - Determination of resistance to intergranular corrosion
H25 GB/T 15970.1 - 1995金属和合金的腐蚀应力腐蚀试验第l部分:试验方法总则
Corrosion of metals and alloys - Stress corrosion testing-Part 1:General guidance on testing procedures
H25 GB/T 15970.2-2000金属和合金的腐蚀应力腐蚀试验第2部分:弯梁试样的制备和应用
Corrosion of metals and alloys-Stress corrosion testing - Part 2:Preparation and use of bent-beam specimens
H25 GB/T 15970.3 - 1995金属和合金的腐蚀应力腐蚀试验第3部分:U型弯曲试样的制备和应用
Corrosion of metals and alloys - Stress corrosion testing - Part 3:Preparation and use of U-bend specimens
H25 GB/T 15970.4-2000金属和合金的腐蚀应力腐蚀试验第4部分:单轴加载拉伸试样的制备和应用
Corrosion of metals and alloys - Stress corrosion testing-Part 4:Preparation and use of uniaxially load edtension ssoecimens
H25 GB/T 15970.6 - 1998金属和合金的腐蚀应力腐蚀试验第5部分:C型环试样的制备和应用
Corrosion of metals and alloys - Stress corrosion testing-Part 5:Preparation and use of c-ring speci-mens
H25 GB/T 15970.6 - 1998金属和合金的腐蚀应力腐蚀试验第6部分:预裂纹试样的制备和应用
Corrosion of metals and alloys BStress corrosion testing-Part 6:Preparation and use of pre-cracked specimens
H25 GB/T 15970.7-2000金属和合金的腐蚀应力腐蚀试验第7部分:慢应变速率试验
Corrosion of metals and alloys - Stress corrosion testing-Part 7:Slow strain rate testing
H125 GB/T 16545 - 1996 金属和合金的腐蚀腐蚀试样上腐蚀产物的清除
Corrosion of metals and alloys - Removal of corrosion products from corrosion test specimens
H25 GB/T 17897 - 1999 不锈钢三氯化铁点腐蚀试验方法
Test of pitting corrosion resistance of stainless steels in the ferric chloride solution
H25 GB/T 17898 - 1999 不锈钢在沸腾氯化镁溶液中应力腐蚀试验方法
Test method for stress corrosion-cracking resistance of stainless steels in a boiling magnesium chloride solution
H25 GB/T 17899 - 1999 不锈钢点蚀电位测量方法
Method of pitUng potential measurement for stainless steels
H25 GB/T 18590-2001 金属和合金的腐蚀点蚀评定方法
Corrosion of metals and alloys - Evaluation of pitting corrosion
H25 GB/T 19291-2003 金属和合金的腐蚀腐蚀试验一般原则
Corrosion of metals and alloys – General principles for corrosion testing
H25 GB/T19292.1-2003金属和合金的腐蚀大气腐蚀性分类
Corrosion of metals and alloys-Corrosivity Of atnlos-pheres-Classification
H25 GB/T 19292.2-2003金属和合金的腐蚀大气腐蚀性腐蚀等级的指导值
Corrosion of metals and alloys - Corrosivity of atmos-pheres-Guiding values for the corrosivity categories
H25 GB/T 19292.3-2003金属和合金的腐蚀大气腐蚀性污染物的测量
Corrosion of metalsand alloys-Corrosivity ofatlnos-pheres-Measurement of pollution
H25 GB/T 19292.4-2003金属和合金的腐蚀大气腐蚀性用于评估腐蚀性的标准试样的腐蚀速率的测定
Corrosion of metals and alloys-Corrosivity of atmospheres-Determination of corrosion rate of standard specnens for the evaluation of corrosivity
H26 GB/T 233-2000 金属材料顶锻试验方法
Metallic materials-Forging test
H26 GB/T 1554-1995 硅晶体完整性化学择优腐蚀检验方法
Test method for clTstallographic perfection of silicon by preferential etch techniques
H26 GB/T 1786-1990 锻制圆饼超声波检验方法
Cheese forging-Method for ultrasonic inspection
H26 GB/T2970-2004 厚钢板超声波检验方法
Thicker steelplates Method for ultrasonicinspection
H26 GB/T 2976-2004 金属材料线材缠绕试验方法
Metallic materials-Wire-Wrapping test
H26 GB/T 3250-1982 铝及铝合金铆钉线铆接试验方法
Aluminium and aluminium alloys-Riveting test method for rivet wire
H26 GB/T 3251-1982 铝及铝合金管材压缩试验方法
Aluminium and aluminium alloys-Compression test method for robes
H26 GB/T 3310-1999 铜合金棒材超声波探伤方法
Copper alloy bars-Ultrasonic testing method
H26 GB/T 4058-1995 硅抛光片氧化诱生缺陷的检验方法
Test method for detection of oxidation induced defects in polished silicon wafers
H26 GB/T4156-1984 金属杯突试验方法(厚度0.2~2 mm)
Metals-Cupping testing method f thickness O.2~2 nun)
H26 GB/T 4162-1991 锻轧钢棒超声波检验方法
Forged and rolled steel bars-Method for ultrasonic examination
H26 GB/T 5126-2001 铝及铝合金冷拉薄壁管材涡流探伤方法
Eddy current inspection method for cold drawn thin wall tubes of aluminium and aluminium alloy
H26 GB/T 5777-1996 无缝钢管超声波探伤检验方法
Seamless steel pipe and robing-Methods for ultra-sonic testing
H26 GB/T 6402-1991 钢锻材超声波检验方法
Steel forgings-Method for ultrasonic examination
H26 GB/T 7734-2004 复合钢板超声波检验方法
Method for ultrasonic testing of clad steel plates
I-126 GB/T 7735-2004 钢管涡流探伤检验方法
Steel tubes-The inspection method on eddy current test
H26 GB/T 7736-2001 钢的低倍组织及缺陷超声波检验法
Ultrasonic inspecting method for macro-structure and imperfection of steel
H26 GB/T 8361-2001 冷拉圆钢表面超声波探伤方法
The surface of cold drawn rounds steel-Method for the ultrasonic inection
H26 GB/T 8752 - 1988 铝及铝合金阳极氧化薄阳极氧化膜连续性的检验硫酸铜试验
Anodizing of aluminium and aluminium alloys - Check of continuity of thin anodic oxide coatlngs-Copper sulphate test
H26 GB/T 8753 - 1988 铝及铝合金阳极氧化 阳极氧化膜封闭后吸附能力的损失评定 酸处理后的染色斑点试验
Anodizing of aluminium and aluminium alloys - Estimation of loss of absorptive power of anodic oxide coatings after sealing - Dye spot test with prior acid treatment
H26 GB/T 10119 - 1988 黄铜耐脱锌腐蚀性能的测定
Copper-zinc alloys - Determination of dezincification corrosion resistance
H26 GB/T 11259 - 1999 超声波检验用钢对比试块的制作与校验方法
Standard practice for fabrication and control of steel reference blocks used in ultrasonic inspection
H26 GB/T 11260 - 1996 圆钢穿过式涡流探伤检验方法
Round steel-The inspection method for pass type eddy current test
H26 GB/T 12604.1 - 1990无损检测术语超声检测
Terminology for nondestructive testing-Ultrasonic testing
H26 GB/T 12604.2 - 1990无损检测术语射线检测
Terminology for nondestructive testing- - Radiographic testing
H26 GB/T 12604.3 - 1990无损检测术语渗透检测
Terminology for nondestructive testing-Penetrant testing
H26 GB/T 12604.4 - 1990元损检测术语声发射检测
Terminology for nondestructive testing-Acoustic emission testing
H26 GB/T 12604.6 - 1990无损检测术语磁粉检测
Terminology for nondestructive testing- - Magnetic particle testing
H26 GB/T 12604.6 - 1990无损检测术语涡流检测
Terminology for nondestructive testing - Eddy current testing
H26 GB/T 12605 - 1990 钢管环缝熔化焊对接接头射线透照工艺和质量分级
Methods of radiographic inspection and quality classification of circum ferential fusion welded but tjointsin steel pipes and tubes
H26 GB/T 12606 - 1999 钢管漏磁探伤方法
Steel tubes-The testing method of magnetic flux leakage
H26 GB/T 14142 - 1993 硅外延层晶体完整性检查方法腐蚀法
Test method for crystallographic perfection of epitaxial layers in silicon by etching techniques
H26 GB/T 14143-1993 300~900um硅片间隙氧含量红外吸收测量方法
300~900um Silicon slices-Measuring of interstitial oxygen content-Infrared absorption method
H26 GB/T 14144-1993 硅晶体中间隙氧含量径向变化测量方法
Test method for determination of radial interstitial oxygen vadation in silicon
H26 GB/T 14693-1993 焊缝无损检测符号
Nondestructive testing symbols for welds
H26 GB/T 16544-1996 球形储罐1射线全景曝光照相方法
Spherical tank-Radiographic method of gamma ray panoramic exposure
H26 GB/T 17990-1999 圆钢点式(线圈)涡流探伤检验方法
Round steel rods-The eddy current testing method with probe coil
H26 GB/T 18256-2000 焊接钢管(埋弧焊除外) 用于确认水压密实性的超声
波检测方法
Welded steel tubes(except submerged arc-welded)一ultrasonic testing for verification of hydraulic leak-tightness
H26 GB/T 19444-2004 硅片氧沉淀特性的测定间隙氧含量减少法
Oxygen precipitation characterization of silicon wafers by measurement of interstitial oxygen reduction
Здесь собраны названия основных стандартов КНР (аналог российских ГОСТов). Если Вы нашли интересующий Вас стандарт, вы можете заказать его у нас. Список не полный, если нужного стандарта тут нет, мы можем найти его в Китае. При необходимости делаем перевод.
Цены зависят от типа стандарта (тематика и объём)

Наши контакты на главной странице сайта
Стандарты Китая
Cельское хозяйство
Медицина
Горное оборудование
Нефть
Энергоресурсы
Химия
Металлургия
Оборудование
Электротехнологии
Электрокомпоненты
Коммуникации
Интсрументы и приборы
Сооружения
Стройматериалы
Дороги и вода
Железная дорога
Дорожный транспорт
Судостроение
Авиация
Текстиль