Синтетические материалы

Содержание:
30 Синтетические материалы - общее
31 синтетические смолы, общих стандарты и методы пластиков
32 синтетической смолы, пластик
33 Пластиковые профиля
34 общих стандарты и методы синтетического каучука
35 синтетический каучук
38 связывающее вещество - общие стандарты и методы
39 связывающее вещество

G31 GB/T 1033-1986 塑料密度和相对密度试验方法
Test method for density and relative density of plas-tics
G31 GB/T 1034-1998 塑料吸水性试验方法
Plastics-Determination of water absorption
G31 GB/T 1035-1970 塑料耐热性(马丁)试验方法
Test method for thermostability of plastics(Martin)
G31 GB/T 1036-1989 塑料线膨胀系数测定方法
Determination for coefficient of linear expansion of plastics
G31 GB/T 1037-1988 塑料薄膜和片材透水蒸气性试验方法杯式法
Test method for water vapor transmission of plastic film and sheet-Cup method
G31 GB/T 1038-2000 塑料薄膜和薄片气体透过性试验方法压差法
Plastics-film and sheeting-Determination of gas transmission-Differential-pressure method
G31 GB/T 1039-1992 塑料力学性能试验方法总则
Plastics-General rules for the test method of mechanical properties
G31 GB/T 1041-1992 塑料压缩性能试验方法
Plastics-Determination of compressive properties
G31 GB/T 1630-1989 环氧树脂命名
Epoxide resins-Designation
G31 GB/T 1632-1993 聚合物稀溶液粘数和特性粘数测定
Determination of viscosity number and limiting viscosity number of polymers in dilute solution
G31 GB/T 1633-2000 热塑性塑料维卡软化温度(VST)的测定
Plastics-Thermolalastic materials-Determination of Vicat softening temperature(VST)
G31 GB/T 1634.1-2004 塑料负荷变形温度的测定第1部分：通用试验方法
Plastics - Determination of temperature of deflection under load - Part:1 General test method
G31 GB/T 1634.2-2004 塑料负荷变形温度的测定第2部分：塑料、硬橡胶和长纤维增强复合材料
Plastics-Determination of temperature of deflection under load-Part 2：Plastics, ebonite and long-fibre-reinforced composites
G31 GB/T 1634.3-2004 塑料负荷变形温度的测定第3部分：高强度热固性层压材料
Plastics - Determination of temperature of deflection under load-Part 3：High-strength thermosetting laminates
G31 GB/T 1636 - 1979 模塑料表观密度试验方法
Test method for apparent density of moulding plastic materials
G31 GB/T 1842 - 1999 聚乙烯环境应力开裂试验方法
Test method for environmental stress-cracking of polyethylene plastics
G31 GB/T 1845.1 - 1999 聚乙烯(PE)模塑和挤出材料第1部分：命名系统和分类基础
Polyethylene(PE) moulding and extrusion materials-Part 1：Designation system and basis for specifications
G31 GB/T 2035 - 1996 塑料术语及其定义
Terms and definitions for plastics
G31 GB/T 2406 - 1993 塑料燃烧性能试验方法氧指数法
Plastics - Determination of flammability by oxygen index
G31 GB/T 2407 - 1980 塑料燃烧性能试验方法炽热棒法
Plastics - Combustion performance test-Blazing rod method
G31 GB/T 2408 - 1996 塑料燃烧性能试验方法水平法和垂直法
Plastics - Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
G31 GB/T 2409 - 1980 塑料黄色指数试验方法
Plastics-Yellow index test method
G31 GB/T 2410 - 1980 透明塑料透光率和雾度试验方法
Transparent plastics；-Transmissivity and haze test
G31 GB/T 241 1 - 1980 塑料邵氏硬度试验方法
Plastics - Shore hardness test
G31 GB/T 2546 - 1988 聚丙烯和丙烯共聚物材料命名
Designation of polypropylene and propylene copoly - metmaterials
G31 GB/T 2546.2-2003 塑料聚丙烯(PP)模塑和挤出材料第2部分：试样制备和性能测定
Plastics - Polypropylene(PP)moulding and extrusion materials - Part 2：Preparation of test specimens and determination of properties
G31 GB/T 2547 - 1981 塑料树脂取样方法
Plastic resins-Sampling
G31 GB/T 2913 - 1982 塑料白度试验方法
Test for whiteness of plastics
G31 GB/T 2914 - 1999 塑料氯乙烯均聚和共聚树脂挥发物(包括水)的测定
Plastics - -Homopolymer and eopolymer resins of vinyl chloride-Determination of volatile matter(including water)
G31 GB/T 2915 - 1999 聚氯乙烯树脂水萃取物电导率的测定
Determination of conductivity of water extract ofpoly (vinyl chloride)resins
G31 GB/T 2916 - 1997 塑料氯乙烯均聚和共聚树脂用空气喷射筛装置的筛分析
Plastics-Vinyl chloride homopolymer and copolymer resins-Sieve analysis using air-jet sieve apparatus
G31 GB/T 2918 - 1998 塑料试样状态调节和试验的标准环境
Plastics-Standard atmospheres for conditioning and testing
G31 GB/T 3401 - 1999 聚氯乙烯树脂稀溶液粘数的测定
Determination of viscosity number of PVC resins in dilute solution
G31 GB/T 3681 - 2000 塑料大气暴露实验方法
Plastics-Test method of exposure to weathering
G31 GB/T 3682-2000 热塑性塑料熔体质量流动速率和熔体体积流动速率的测定
Determination of the melt mass-flow rate(MFR)and the melt volume-flow rate(MVR)of thermoplastics
G31 GB/T 3960 - 1983 塑料滑动摩擦磨损试验方法
Test method for friction and wear of plastics by sliding
G31 GB/T 4608 - 1984 部分结晶聚合物熔点试验方法 光学法
Test for melting point of semicrystalline polymers-Optical method
G31 GB/T 4610 - 1984 塑料燃烧性能试验方法点着温度的测定
Test for flammability of plastics – Ignition temperature test
G31 GB/T 4726 - 1984 树脂浇铸体扭转试验方法
Standard method of torsion test for resin cast
G31 GB/T 5470 - 1985 塑料冲击脆化温度试验方法
Test method for brittleness temperature of plastics by impact
G31 GB/T 5471 - 1985 热固性模塑料压塑试样制备方法
Preparation method for compression moulding of specimens of the rmosetting moulding materials

G31 GB/T 5472 - 1985 热固性模塑料矩道流动固化性试验方法
Test method for rectangular flow cure properties of thermosetting moulding compounds
G31 GB/T 5473 - 1985 酚醛模塑制品游离氨的检定
Phenol-formaldehyde mouldings- - Detection of free ammonia




G31 GB/T 5474 - 1985 酚醛模塑制品游离氨和铵化合物的测定 比色法
Phenol-formaldehyde mouldings- - Determination of free ammonia and ammonium compounds-Colori-metric comparison method
G31 GB/T 5475 - 1985 离子交换树脂取样方法
Methods for sampling ion exchange resins
G31 GB/T 5476 - 1996 离子交换树脂预处理方法
Methods for pretreating ion exchange resins
G31 GB/T 5478 - 1985 塑料滚动磨损试验方法
Test method for wear of plastics by rolling
G31 GB/T 5759-2000 氢氧型阴离子交换树脂含水量测定方法
Determination for water retention capacity of anion exchange resins in hydroxylic form
G31 GB/T 5760-2000 氢氧型阴离子交换树脂交换容量测定方法
Determination for exchange capacity of anion exchange resins in hydroxylic form
G31 GB/T 6342 - 1996 泡沫塑料与橡胶线性尺寸的测定
Cellular plastics and rubbers - Determination of linear dimensions
G31 GB/T 6343 - 1995 泡沫塑料和橡胶表观(体积)密度的测定
Cellular plastics and rubbers-Determination of apparent(bulk)density
G31 GB/T 6344 - 1996 软质泡沫聚合物材料拉伸强度和断裂伸长率的测定
Polymeric materials cellular flexible - Determination of tensile strength and elongation at break
G31 GB/T 6594.1 - 1998 聚苯乙烯(PS)模塑和挤出材料第1部分：命名系统和分类基础
Polystyrene(PS) moulding and extrusion materials - Part 1：Designation system and basis for specifications
G31 GB/T6594.2-2003 塑料聚苯乙烯(PS)模塑和挤出材料第2部分：试样制备和性能测定
Plastics - Polystyrene(PS)moulding and extrusion materials-Part 2：Preparation of test specimens and determination of properties
G31 GB/T 6595 - 1986 聚丙烯树脂鱼眼测试方法
Test method for fish eye count of polypropylene resin
G31 GB/T 6669-2001 软质泡沫聚合材料压缩永久变形的测定
Polymeric material cellular flexible - Determination of compression set
G31 GB/T 6672-2001 塑料薄膜和薄片厚度测定机械测量法
Plastics film and sheeting.- - Determination of thick-nessbymechanical scanning
G31 GB/T 6673-2001 塑料薄膜和薄片长度和宽度的测定
Plastics film and sheeting- - Determination of length and width
G31 GB/T 7130 - 1986 酚醛模塑制品中游离酚的测定碘量法
Determination of tree phenolsinphenol-formaldehyde mouldings-Iodometric method
G31 GB/T 7141 - 1992 塑料热空气暴露试验方法 .
Plastics - Methods of exposure to menmal air
G31 GB/T 7142-2002 塑料长期热暴露后时间.温度极限的测定
Determination of time-temperature limits for plastics after prolonged exposure to heat
G31 GB/T 7155.1 - 1987 热塑性塑料管材及管件密度的测定第l部分：聚乙烯管材及管件基准密度的测定
Determination of density of thermoplastic pipes and fittings - Part l：Determination of reference density of polyethylene pipes and fittings
G31 GB/T 7155.2 - 1987 热塑性塑料管材及管件密度的测定第2部分：聚丙烯管材及管件密度的测定
Determination of density of thermoplastic pipes and fittings - Part 2：Determination of density of polypro-pylene pipes and fittings
G31 GB/T 8323 - 1987 塑料燃烧性能试验方法烟密度法
Test method for flammability of plastics - Smoke density test
G31 GB/T 8324～1987 模塑料体积系数试验方法
Test method for bulk factor of moulding materials
G31 GB/T 8325 - 1987 聚合物和共聚物水分散体pn值测定方法
Determination of pH of aqueous dispersions of polymers and copolymers
G31 GB/T 8330 - 1987 离子交换树脂湿真密度测定方法
Method for the determination of true density of ion exchange resins in wet state
G31 GB/T 8331 - 1987 离子交换树脂湿视密度测定方法
Method for the determination of bulk density of ion exchange resins in wet state
G31 GB/T 8332 - 1987 泡沫塑料燃烧性能试验方法水平燃烧法
Test method for flammability of cellular plastics-Horizontalburningmethod
G31 GB/T 8333 - 1987 硬泡沫塑料燃烧性能试验方法垂直燃烧法
Test method for flammability of rigid cellular plas-tics-Virtieal burning method
G31 GB/T 8661 - 1988 用气相色谱法测定丙烯腈一丁二烯.苯乙烯(ABS)树脂中残留丙烯腈单体含量
Determination of residual acrylonitrile monomer con-tent m acrylonitrile-buta-diene-styrene resin by gas chromatography
G31 GB/T 9341-2000 塑料弯曲性能试验方法
Plastics - Determination of flexund properties
G31 GB/T 9342 - 1988 塑料洛氏硬度试验方法
Plastics - Determination Of hardness by the ball indentation method-Rockwell hardness
G31 GB/T 9343 - 1988 塑料燃烧性能试验方法闪点和自燃点的测定
Test method for flammability of plastics - Flash-ignition temperature and serf-ignition temperature test
G31 GB/T 9345 - 1988 塑料灰分通用测定方法
Plastics - Determination of ash- - General methods
G31 GB/T 9347 - 1988 氯乙烯-L酸乙烯酯共聚物中乙酸乙烯酯的测定方法
Plastics-Vinyl chloride-vinyl acetate copolymers - Determination of vinyl acetate
G31 GB/T 9348 - 1988 聚氯乙烯树脂的杂质与外来物粒子数的测定方法
Determination of number of impurities and foreign particles of polyvinyl chloride resins
G31 GB/T 9352 - 1988 热塑性塑料压缩试样的制备
Plastics-Compression moulding test specimens of thermoplastic materials
G31 GB/T 1 1991 - 1989 离子交换树脂转型膨胀率测定方法
Ion exchange resins-Determination for swelling upon complete conversion
G31 GB/T 11992 - 1989 氯型强碱性阴离子交换树脂交换容量测定方法
Strongbasic anion exchange resinsin chlorideform-Determination of exchange capacity
G31 GB/T 11997 - 1989 塑料多用途试样的制备和使用
Plastics - Preparation and use of multipurpose test specimens
G31 GB/T 1 1998 - 1989 塑料玻璃化温度测定方法热机械分析法
Determination of galss transition temperature of plastics-Thermomechanical analysis
G31 GB/T 11999 - 1989 塑料薄膜和薄片耐撕裂性试验方法埃莱门多夫法
Plastics - Film and sheeting-Determination of tear resistance - - Eimend off method
G31 GB/T 12000-2003 塑料暴露于湿热、水喷雾和盐雾中影响的测定
Determination of the effects of exposure to damp heat, water spray and salt mist for plastics
G31 GB/T 12001.1 - 1989未增塑聚氯乙烯窗用模塑料第1部分：命名
Moulding materials for windows of unplasticized poly-vinyl chloride - Part l：Designation
G31 GB/T 12001.2 - 1989未增塑聚氯乙烯窗用模塑料第2部分：质量规格
Moulding materials for windows of unplasticized poly vinyl chloride - Part 2：Quality specification
G31 GB/T 12001.3 - 1989未增塑聚氯乙烯窗用模塑料第3部分：性能试验方法
Moulding materials for windows of unplasticized poly - vinyl chloride-Part 3：Determination Of properties
G31 GB/T 12004.1 - 1989聚氯乙烯糊树脂中杂质粒子数测定方法
Determination of impurities particles number in poly-vinyl chloride paste resins
G31 GB/T 12004.2 - 1996聚氯乙烯糊树脂糊的制备
PVC paste resins - Preparation of apaste
G31 GB/T 12004.3 - 1989聚氯乙烯增塑糊表观粘度测定方法
Determination for apparent viscosity of polyvinyl chloride paste
G31 GB/T 12004.4-2003聚氯乙烯增塑糊表观粘度的测定Brookfield试验法
Polyvinyl chloride paste - Determination of apparent Viscosity by the Brookfield test method
G31 GB/T 12004.5 - 1992聚氯乙烯增塑糊刮板细度的测定
Polyvinyl chloride plastsols - Determination of fine-hess of grind
G31 GB/T 12005.1 - 1989聚丙烯酰胺特性粘数测定方法
Determination of limiting viscosity number of polyacrylamjde
G31 GB/T 12005.2 - 1989聚丙烯酰胺固含量测定方法
Determination of sold content of polyacrylamide
G31 GB/T 12005.3 - 1989聚丙烯酰胺中残留丙烯酰胺含量测定方法溴化法
Determination of residual acrylamide of polyacry - lamide - Bromating method
G31 GB/T 12005.4 - 1989聚丙烯酰胺中残留丙烯酰胺含量测定方法 液相色谱法
Determination of residual acrylamide of polyacry-lamide一Liquid chromatography
G31 GB/T 12005.5 - 1989聚丙烯酰胺中残留丙烯酰胺含量测定方法气相色谱法
Determination of residual acrylamide content of poly-acrylamide - Gas chroHlatograghy
G31 GB/T 12005.6 - 1989部分水解聚丙烯酰胺水解度测定方法
Determination of hydrolysis degree of partly hydroly-sis polyacrylamide
G31 GB/T 12005.7 - 1989粉状聚丙烯酰胺粒度测定方法
Determination of particle size of powder polyacry-lamide
G31 GB/T 12005.8 - 1989粉状聚丙烯酰胺溶解速度测定方法
Determination of dissolving velocity of powder poly_acrylamide
G31 GB/T 12005.9 - 1992聚丙烯酰胺命名
Designation of polyacrylamide
G31 GB/T 12005.10 - 1992聚丙烯酰胺分子量测定粘度法
Determination for molecular weight of polyacrylamide by viscometry
G31 GB/T 12006.1 - 1989聚酰胺粘数测定方法
Polyamides - Determination of viscosity number
G31 GB/T 12006.2 - 1989聚酰胺含水量测定方法
Polyamides-Determination of water content
G31 GB/T 12006.3 - 1989聚酰胺灰分测定方法
Polyamides - Determination of ash
G31 GB/T 12006.4 - 1989聚酰胺均聚物沸腾甲醇可提取物测定方法
Polyamide homopolymers - Determination of matter extractable by boiling methanol
G31 GB/T 12007.1 - 1989环氧树脂颜色测定方法加德纳色度法
Epoxide resins-Determination of color-Gardner color scale
G31 GB/T 12007.2 - 1989环氧树脂钠离子测定方法
Epoxide resins - Determination of sodium ion
G31 GB/T 12007.3 - 1989环氧树脂总氯含量测定方法
Epoxide resins - Determination of total chlorine content
G31 GB/T 12007.4 - 1989环氧树脂粘度测定方法
Epoxide resins - Determination of viscosity
G31 GB/T 12007.5 - 1989环氧树脂密度测定方法 比重瓶法
Epoxide resins - Determination of density-Pyknome-Ter method
G31 GB/T 12007.6-1989环氧树脂软化点测定方法环球法
Epoxide resins-Determination of softening point-Ring and ball method
G31 GB/T 12007.7-1989环氧树脂凝胶时间测定方法
Determination of gelation time of epoxide resins
G31 GB/T 12008.1-1989聚醚多元醇命名
Polyether polyols-DesignatiOn
G31 GB/T 12008.2-1989聚醚多元醇规格
Polyether polyols - Specification
G31 GB/T 12008.3-1989聚醚多元醇中羟值测定方法
Polyether polyols-Determination of hydroxyl number
G31 GB/T 12008.4-1989聚醚多元醇中钠和钾测定方法
Polyether polyols-Determination of sodium and potassium
G31 GB/T 12008.5-1989聚醚多元醇中酸值测定方法
Polyether polyols-Determination of acid number
G31 GB/T 12008.6-1989聚醚多元醇中水分含量测定方法
Polyether polyols-Determination of water content
G31 GB/T 12008.7-1992聚醚多元醇中不饱和度的测定
Polyether Polyols-Determination ofunsaturation
G31 GB/T 12008.8-1992聚醚多元醇的粘度测定
Polyether polyols-Determination of viscosity
G31 GB/T 12009.1-1989异氰酸酯中总氯含量测定方法
Isocyanates-Determination oftotal chlorine content
G31 GB/T 12009.2-1989异氰酸酯中水解氯含量测定方法
Isocyanates-Determination of hydrolyzable chlorine content
G31 GB/T 12009.3-1989多亚甲基多苯基异氰酸酯粘度测定方法
Polymethylene polyphenyl isocyanate-Determination of viscosity
G31 GB/T 12009.4-1989多亚甲基多苯基异氰酸酯中异氰酸根含量测定方法
Polymethylene polyphenyl isocyanate-Determination of isocyanate content
G31 GB/T 12009.5-1992异氰酸酯中酸度的测定
Isocyanates-Determination ofacidity
G31 GB/T 12010.1-1989聚乙烯醇树脂命名
Polyvinyl alcohol resins-Designation
G31 GB/T 12010.2-1989聚乙烯醇树脂规格
Polyvinyl alcohol resins - Specification
G31 GB/T 12010.3-1989聚乙烯醇树脂粘度测定方法
Dete rnunation of viscocity of polyvinyl alcohol resins
G31 GB/T 12010.4-1989聚乙烯醇树脂挥发分测定方法
Determination of volatile matter of polyvinyl alcohol Resins
G31 GB/T 12010.5-1989聚乙烯醇树脂残留乙酸根(或醇解度)测定方法
Determination of residual acetic radical contents for alcoholysis, of polyvinyl alcohol resdns
G31 GB/T 12010.6-1989聚乙烯醇树脂乙酸钠含量测定方法
Determination of sodiunl acetate contents of polyvinyl alcohol resins
G31 GB/T 12010.7-1989聚乙烯醇树脂灰分测定方法
Determination of ash content of polyvinyl alcohol resins
G31 GB/T 12010.8-1989聚乙烯醇树脂pH值测定方法
Determination Of pH of polyvinyl alcohol resins
G31 GB/T 12010.9-1989聚乙烯醇树脂平均聚合度测定方法
Determination of average polymerization degree of polyvinyl alcohol resins
G31 GB/T 12010.10-1989聚乙烯醇树脂粒度测定方法
Determination of particle size of polyvinyl alcohol resins
G31 GB/T 12010.11-1989聚乙烯醇树脂氢氧化钠含量测定方法
Determination of sodium hydroxide contents of poly_vinyl alcohol resins
G31 GB/T 12010.12-1989聚乙烯醇树脂透明度测定方法
Determination of transparency of polyvinyl alcohol resins
G31 GB/T 12027-2004 塑料薄膜和薄片加热尺寸变化率试验方法
Plastics-Film and sheeting-Determination Of dimensional change on heating
G31 GB/T 13525-1992 塑料拉伸冲击性能试验方法
Test method for tensile-impact property of plastics
G31 GB/T 14234-1993 塑料件表面粗糙度
Surface roughness for plastic parts
G31 GB/T 14483-1993 塑料负载变形试验方法
Test methods for deformation of plastics under load
G31 GB/T 14484-1993 塑料承载强度试验方法
Test methods for bearing strength of plastics
G31 GB/T 14485-1993 工程塑料硬质塑料板材及塑料件耐冲击性能试验方法落球法
Standard methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ban(famng ball)
G31 GB/T 14486-1993 工程塑料模塑塑料件尺寸公差
Dimensional tolerances for plastic engineering moulded plastic pats
G31 GB/T 14519-1993 塑料在玻璃板过滤后的日光下间接曝露试验方法
Plastics-Method of exposure to indirect weathering using glass-filtered daylight
G31 GB/T 14572-1993 热塑性塑料树脂产品检验规则及标志、包装、贮运规定
Rules for inspecting, marking, packing, storing and transporting of the rmoplastic materials
G31 GB/T 14694-1993 塑料压缩弹性模量的测定
Plastics-Determination of compressive elastic modulus
G31 GB/T 15223 - 1994 液体树脂密度的测定方法 比重瓶法
Plastics-Liquid resins - Determination of density by the pyknometer method
G31 GB/T 15585 - 1995 热塑性塑料注射成型收缩率的测定
Determination of shrinkage for injection moulding thermoplastics
G31 GB/T 15819 - 1995 灌溉支管用聚乙烯(PE)25管材 由插入式管件引起环境应力开裂敏感性的试验方法和技术要求
Test method and specifications of susceptibility for environmental stress-cracking induced by insert type fittings in low density polyethylene(PE)26 pipes for irrigation laterals
G31 GB/T 15820 - 1995 聚乙烯压力管材与管件连接的耐拉拔试验
Test of resistance to pull out of joints between poly-ethylene(PE)pressure pipes and fittings
G31 GB/T 16276 - 1996 塑料薄膜粘连性试验方法
Test method for blocking of plastic film
G31 GB/T 16419 - 1996 塑料弯曲性能小试样试验方法
Plastics - Determination of flexural properties by use of small specimens
G31 GB/T 16420 - 1996 塑料冲击性能小试样试验方法
Plastics - Determination of impact properties by use of small specimens
G31 GB/T 16421 - 1996 塑料拉伸性能小试样试验方法
Plastics-Determination of tensile properties by use of small specimens
G331 GB/T 16422.1 - 1996塑料实验室光源曝露试验方法第l部分：通则
Plastics-Methods of exposure to laboratory nght sources - Part 1：General guidance
G31 GB/T 16422.2 - 1999塑料实验室光源暴露试验方法第2部分：氙弧灯
Plastics-Methods of exposure to laboratory nght sources - Part 2：Xenon-arc sources
G31 GB/T 16422.3 - 1997塑料实验室光源曝露试验方法第3部分：荧光紫外灯
Plastics-Methods of exposure to laboratory tight sources - Part 3：Fluorescent UV lamps
G31 GB/T 16422.4 - 1996塑料实验室光源曝露试验方法 第4部分：开放式碳弧灯
Plastics - Methods of exposure to laboratory light sources - Part 4：Open flame carbon arc lamp
G31 GB/T 16578 - 1996 塑料薄膜和薄片耐撕裂性能试验方法裤形撕裂法
Plastics - Film and sheeting - Determination of tear resistance.- - Trouser tear method
G31 GB/T 16581 - 1996 绝缘液体燃烧性能试验方法氧指数法
Test method for the determination of oxygen index of insulating liquids
G31 GB/T 16582 - 1996 部分结晶聚合物熔点试验方法毛细管法
Determination of melting point of semi-crystalline polymers- - Capillary tube method
G31 GB/T 17037.1-1997 热塑料性塑料材料注塑试样的制备第2部分：一般原理及多用途试样和长条试样的制备
Injection moulding of test specimens of thermoplastic materials - Part 1：General principles and moulding of multipurpose and bar test specimens
G31 GB/T 17037.3-2003塑料热塑性塑料材料注塑试样的制备第3部分：小方试片
Plastics一Injection moulding of test specimens of thermoplastic materials - Part 3：Small plates
G31 GB/T 17037.4-2003塑料热塑性塑料材料注塑试样的制备第4部分：模塑收缩率的测定
Plastic一Ⅻection moulding of test specimens of thermoplastic materials-Part 4：Determination Of mould-ing shrinkage
G31 GB/T 17003 - 1998 光解性塑料户外暴露试验方法
Method for outdoor exposure testing of photodegrad-able plastics
G31 GB/T 19275-2003 材料在特定微生物作用下潜在生物分解和崩解能力的评价
Evaluation of the potential biodegradability and disintegration of plastic materials by the action of the specific microorganisms
G31 GB/T 19276.1-2003水性培养液中材料最终需氧生物分解能力的测定采用测定密闭呼吸计中需氧量的方法
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium-Method
by measuring the oxygen demand in a closed respirometer
G31 GB/T 19276.2-2003水性培养液中材料最终需氧生物分解能力的测定采用测定释放的二氧化碳的方法
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium-Method by analysis of evolved carbon diomde
G31 GB/T 19277-2003 受控堆肥条件下材料最终需氧生物分解和崩解能力的测定采用测定释放的二氧化碳的方法
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under con-trolled composting conditions-Method by analysis of evolved carbon diomde
G31 GB/T 19466.1-2004塑料差示扫描量热法(DSC)第1部分：通则
Plastics - Differential scanning calorimetry(DSC)一Part l：General principles
G31 GB/T 19466.2-2004塑料差示扫描量热法(DSC)第2部分：玻璃化转变温度的测定
Plastics - Differential scanning calorimetry(DSC)-Part 2：Determination of glass transition temperature
G31 GB/T 19466.3-2004塑料差示扫描量热法(DSC)第3部分：熔融和结晶温度及热焓的测定
Plastics - Differential scanning calorimetry(DSC)一Part 3：Determination of temperature and enthalpy of melting and crystallizallization
G31 GB/T 19467.1-2004塑料可比单点数据的获得和表示 第l部分：模塑材料
Plastics-Acquisition and presentation of comparable single-point data-Part l：Moulding materials
G31 GB/T 19467.2-2004塑料可比单点数据的获得和表示第2部分：长纤维增强材料
Plastics-Acquisition and presentation of comparable single-point data-Part 2：Long-fibre-reinforced plastics
G32 GB/T 1040 - 1992 塑料拉伸性能试验方法
Plastics - Determination of tensile properties
G32 GB/T 1043 - 1993 硬质塑料简支梁冲击试验方法
Plastics-Determination of charpy impact strength of rigid mateeals
G32 GB 1404 - 1995 酚醛模塑料
Phenofic moulding materials
G32 GB/T 1631 - 1979 离子交换树脂分类、命名及型号
Classification. designation and types of ion exchange resin
G32 GB/T 1841 - 1980 聚烯烃树脂稀溶液粘度试验方法
Test method for the viscosity of the dilute solution of polyolefine resin
G32 GB/T 1843 - 1996 塑料悬臂梁冲击试验方法
Plastics-Determination of izodimpact strength
G32 GB/T 1844.1 - 1995 塑料及树脂缩写代号第一部分：基础聚合物及其特征性能
Symbols of plastics and resins-Part 1：Basic polymers and their special characteristics
G32 GB/T 1844.2 - 1995 塑料及树脂缩写代号第二部分：填充及增强材料
Symbols of plastics and resins - Part 2：Fillers and reinforcing materials
G32 GB/T 1844.3 - 1995 塑料及树脂缩写代号第三部分：增塑剂
Symbols of plastics and resins - Part 3：Plasticizers
G32 GB/T 1846 - 1980 聚氯醚树脂稀溶液粘度试验方法
Test method for the viscosity of the dilute solution of polychloroether resin
G32 GB/T 1847 - 1980 聚甲醛树脂稀溶液粘度试验方法
Test method for the viscosity of the dilute solution of polyformaldehyde resin
G32 GB/T 2412 - 1980 聚丙烯等规指数测试方法
Polypropylene-Method of determination of normal indices
G32 GB/T 2895 - 1982 不饱和聚酯树脂酸值的测定
Determination for acid value of unsaturated polyester resins
G32 GB/T 2917.1-2002 以氯乙烯均聚和共聚物为主的共混物及制品在高温时放出氯化氢和任何其他酸性产物的测定刚果红法
Determination of compounds and products based on vinglchloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevoted temperatures - Congo red method
G32 GB/T 3400-2002 塑料通用型氯乙烯均聚和共聚树脂 室温下增塑剂吸收量的测定
Plastics-Homopolymer and copolymer resins of vinyl chloeride for general use - Determination of plasticizer absorption at room temperature
G32 GB/T 3402 - 1994 氯乙烯均聚物和共聚物树脂命名
Designation of homopolymer and copolymer resins of vinyl chloride
G32 GB/T 4611-1993 通用型聚氯乙烯树脂“鱼眼”测试方法
Determination method of fish eyes for polyvinyl chloride resins of general use
G32 GB/T 4612-1984 环氧化合物环氧当量的测定
Epoxide compounds-Determination of epoxide equivalent
G32 GB/T 4613-1984 环氧树脂和缩水甘油酯无机氯的测定
Epoxide resins and glycidyl esters-Determination of inorganic chlorine
G32 GB/T 4615-1984 聚氯乙烯树脂中残留氯乙烯单体含量测定方法
Determination method of residual vinyl chloride monomer contents in polyvinyl chloride
G32 GB/T 4616-1984 酚醛模塑料丙酮可溶物(未模塑态材料的表观树脂含量)的测定
Phenolic moulding materials-Determination of ace-tone-soluble matter(apparent resin content of mater-ial in the unmoulded state)
G32 GB/T 4617-1984 酚醛模塑制品丙酮可溶物的测定
Phenolic mouldings-Determination of acetone-soluble matter
G32 GB/T 4618-1984 环氧树脂和有关材料易皂化氯的测定
Epoxide resins and related materials-Determination of easily saponifiable chlorine
G32 GB/T 5757-1986 离子交换树脂含水量测定方法
Determination for water retention capacity of ion exchange resins
G32 GB/T 5758-2001 离子交换树脂粒度、有效粒径和均一系数的测定
Determination for particle size range, effective size and uniformity coefficient of ion exchange resins
G32 GB/T 5761-1993 悬浮法通用型聚氯乙烯树脂
Suspension polyvinyl chloride resins of general purpose
G32 GB/T 6598-1986 小角激光光散射法测定聚苯乙烯标准样品的重均分子量
Determination of weight-average molecular weight of polystyrene standards by low angle laser light scatter-ing method
G32 GB/T 6599-1986 体积排斥色谱法测定聚苯乙烯标准样品的平均分子量及分子量分布
Determination of molecular weight averages and molecularweight distribution of polystyrene standards by steric exclusion chromatography
G32 GB/T 6691-1986 树脂整理剂折射率的测定方法
Resin finishing agent-Testing method for refractive index
G32 GB/T 6692-1986 树脂整理剂比重的测定方法
Resin finishing agent-Testing method for specific gravity
G32 GB/T 7134-1996 浇铸型工业有机玻璃板材、棒材和管材
Poly(methyl methacrylate)cast sheets, rods and tubes
G32 GB/T 7139-2002 塑料氯乙烯均聚物和共聚物氯含量的测定
Plastics - Vinyl chloride homopolymem and copolymers- Determination of chlorine content
G32 GB/T 7193.1 - 1987 不饱和聚酯树脂粘度测定方法
Unsaturated polyester resin - Determination of viscosity
G32 GB/T 7193.2 - 1987 不饱和聚酯树脂羟值测定方法
Unsaturated polyester resin-Determination of hydroxyl value
G32 GB/T 7193.3 - 1987 不饱和聚酯树脂固体含量测定方法
Unsaturated polyester resin-Determination of solid content
G32 GB/T 7193.4 - 1987 不饱和聚酯树脂80℃下反应活性测定方法
Unsaturated polyester resin__ - Determination of reactivity at 80℃
G32 GB/T 7193.5 - 1987 不饱和聚酯树脂80℃热稳定性测定方法
Unsaturated polyester resin-Determination of heat stability at 80℃
G32 GB/T 7193.6 - 1987 不饱和聚酯树脂25℃凝胶时间测定方法
Unsaturated polyester resin- - Determination of gel time at 25℃
G32 GB/T 7193.7 - 1992 液态不饱和聚酯树脂颜色试验方法
Test method for colourofliquid unsaturatedpolyester resin
G32 GB/T 7194 - 1987 不饱和聚酯树脂浇铸体耐碱性测定方法
Unsaturated polyester resin-Determination of stability of casting resin in basic solution
G32 GB/T 8144 - 1987 阳离子交换树脂交换容量测定方法
Determination for exchange capacity of cation exchange resins
G32 GB/T 8237 - 1987 玻璃纤维增强塑料(玻璃钢)用液体不饱和聚酯树脂
Liquid unsaturated polyester resin for glass fiber reinforced plastics
G32 GB/T 8238 - 1987 不饱和聚酯树脂液体和浇铸体折光率的测定
Unsaturated polyester resin - Determination of refractive index of liquid and casting
G32 GB/T 9349-2002 聚氯乙烯、相关含氯均聚物和共聚物及其共混物热稳定性的测定变色法
Determination of the rmal stabitity of polyfvinyl chlo-ride)related chlorine-containing homopolymem and copolymem and their compounds - Discoloration method
G32 GB/T 9350-2003 塑料氯乙烯均聚和共聚树脂水萃取液pH值的测定
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract
G32 GB/T 9638 - 1988 塑料燃烧烟尘的测定称量法
Gravimetric determination of smoke particulates from combustion of plastic materials
G32 GB/T 10799 - 1989 硬质泡沫塑料开孔与闭孔体积百分率试验方法
Cellular plastics- - Determination of volume percent-age of open and closed cells of rigid materials
G32 GB/T 10801.1-2002绝热用模塑聚苯乙烯泡沫塑料
Moulded polystyrene foam board for thermal insulation
G32 GB/T 10801.2-2002绝热用挤塑聚苯乙烯泡沫塑料(XPS)
Rigid extruded polystyrene foam board for thermal insulation(XPS)
G32 GB/T 10802-1989 软质聚氨酯泡沫塑料
Cellular plastics-Flexible polyurethane foam
G32 GB/T 10807-1989 软质泡沫聚合材料压陷硬度试验方法
Polymeric materials, cellular flexible-Determination of hardness(indentation technique)
G32 GB/T 10808-1989 软质泡沫塑料撕裂性能试验方法
Cellular plastics-Tear resistance test for flexible materials
G32 GB 11115-1989 低密度聚乙烯树脂
Low density polyethylene resin
G32 GB 11116-1989 高密度聚乙烯树脂
High density polyethylene resin
G32 GB/T 1 1546-1989 塑料拉伸蠕变测定方法
Plastics-Determination of tensile creep
G32 GB/T 11547-1989 塑料耐液体化学药品(包括水)性能测定方法
Plastics-Determination of the effects of liquid chemical sincludingwater
G32 GB/T 11548-1989 硬质塑料板材耐冲击性能试验方法(落锤法)
Standard test method for impact resistance of rigid plastic sheeting by means of a tup(falling weight)
G32 GB/T 12598-2001 离子交换树脂渗磨圆球率、磨后圆球率的测定
Determination for sphericity of ion exchange resins after attrition or osmotic-attrition
G32 GB 12670-1990 聚丙烯树脂
Polypropylene resin
G32 GB 12671-1990 聚苯乙烯树脂
Polystyrene resin
G32 GB 12672-1990 丙烯腈一丁二烯-苯乙烯(ABS)树脂
Acrylonitrile-butadiene-styrene(ABS)resin
G32 GB/T 1281 1-1991 硬质泡沫塑料平均泡孑L尺寸试验方法
Test method for average cell size of rigid cellular plastics
G32 GB/T 12812-1991 硬质泡沫塑料滚动磨损试验方法
Test method for tumbnng friability of rigid ceHular plastics
G32 GB/T 13453.1-1992氯乙烯均聚物和共聚物树脂水中筛析方法
Test method of vinyl chloride homopolymer and copolymerresins-Sieve analysis in water
G32 GB/T 13453.2-1992聚氯乙烯树脂甲醇或乙醇萃取物含量的测定方法
Determination of the content of methanol or ethanol extract ofpolyvinyl chloride resins
G32 GB/T 13453.3-1992聚氯乙烯灰分和硫酸化灰分的测定
Determination of ash and sulphated ash of PVC
G32 GB 13454-1992 氨基模塑料
Plastics-Aminoplastic moulding materials-Specification
G32 GB/T 13455-1992 氨基模塑料挥发物测定方法
Plastics-Aminoplastic moulding materials-Determination of volatile matter
G32 GB/T 13657一1992 双酚一A型环氧树脂
Bisphenol-A epoxy resins
G32 GB/T 13658-1992 多亚甲基多苯基异氰酸酯
Polymethylene polyphenylene isocyanate
G32 GB/T 13659-1992 001×7强酸性苯乙烯系阳离子交换树脂
001×7 Strongly acidic styrene type cation exchange resins
G32 GB/T 13660 - 1992 201×7强碱性苯乙烯系阴离子交换树脂
201×7 Strongly basic styrene type anion exchange resins
G32 GB/T 13940 - 1992 聚丙烯酰胺
Polyacrylamide
G32 GB/T 13941 - 1992 二苯基甲烷4, 4’-二异氰酸酯
Diphenylmethane 4.4’一diisocyanate
G32 GB/T 14520 - 1993 气相色谱分析法测定不饱和聚酯树脂增强塑料中的残留苯乙烯单体含量
Determination ofresidual styrene monomer content in reinforced plastics based on unsaturated polyester resins by gas ehromatography
G32 GB/T 14590一1993 钮扣用液体不饱和聚酯树脂
Liquid unsaturated polyesterresinfor button
G32 GB/T 15047-1994 塑料扭转刚性试验方法
Test method for stiffness proporties in torsion of plastics
G32 GB/T 15048-1994 硬质泡沫塑料压缩蠕变试验方法
Cellular plastics rigid-Determination of compressive creep
G32 GB 15592一1996 糊用聚氯乙烯树脂
Paste polyvinyl chloride resins
G32 GB 15593 - 1995 输血(液)器具用软聚氯乙烯塑料
Plasticized polyvinyl chloride(PVC)compounds for transfusion(infusion)equipment
G32 GB/T 15594-1995 八羟基聚醚多元醇
Octahydroxy polyether polyols
G132 GB/T 15595-1995 聚氯乙烯树脂热稳定性试验方法 白度法
Test methods for the thermal stability of polyvinyl chloride resm-Whiteness method
G32 GB/T 15596-1995 塑料暴露于玻璃下日光或自然气候或人工光后颜色和性能变化的测定
Plastics-Detenlatnafion of changes in colour and vatiations in properties after exposure to daylight under glass natural weathering 0r artificial light
G32 GB/T 15597-1995 聚甲基丙烯酸甲酯(PMMA)模塑材料
Polymethyl methacrylate(PMMA)m oulding materials
G32 GB/T 15598 - 1995 塑料剪切强度试验方法穿孔法
Testing methods for shear strength of plastics by punch tool
G32 GB/T 16576 - 1996 三羟基聚醚多元醇
Tri-hydroxy polyether polyols
G32 GB/T 16577 - 1996 四羟基聚醚多元醇
Tetra-hydroxy polyether polyols
G32 GB/T 16579 - 1996 D001大孔强酸性苯乙烯系阳离子交换树脂
D001 macroporous strongly acidic styrene type cation exchange resins
G32 GB/T 16580 - 1996 D201大孔强碱性苯乙烯系阴离子交换树脂
D201 macroporous strongly basic styrene type anion exchange resins
G32 GB/T 16613 - 1996 试验用聚氯乙烯(PVC)糊的制备分散器法
Preparation of polyvinyl chloride(PVC)pastes for test purposes - - Dissolver method
G32 GB/T 16867 - 1997 聚苯乙烯和丙烯腈.丁二烯.苯乙烯树脂中残留苯乙烯单体的测定气相色谱法
Determination of residual styrene monomer in poly-styrene and acry-lonitrile-butadiene-styrene resins by gas chromatography
G32 GB 17931-2003 瓶用聚对苯二甲酸乙二醇酯(PET)树脂
Poly(ethylene terephthalate)(PET)resin for bottles
G32 GB/T 18964.2-2003塑料抗冲击聚苯乙烯(PS-I)模塑和挤出材料第2部分：试样制备和性能测定
Plastics-Impact-resistant polystyrene(PS-I)mould-ing and extrusion materials - Part 2：Preparation of test specimens and determination of properties
G33 GB/T 3830 - 1994 软聚氯乙烯压延薄膜和片材
Calendered film(sheet)from flexible PVC
G33 GB/T 4217-2001 流体输送用热塑性塑料管材公称外径和公称压力
Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures
G33 GB/T 4454～1996 硬质聚氯乙烯层压板材
Rigid polyvinyl chloride laminated plates
G33 GB/T 5836.1 - 1992 建筑排水用硬聚氯乙烯管材
Unplasticized polyvinyl chloride pipes for drainage in buildings
G33 GB/T 5836.2 - 1992 建筑排水用硬聚氯乙烯管件
Unplasticized polyvinyl chloride fittings for drainage in buildings
G33 GB/T 6111-2003 流体输送用热塑性塑料管材耐内压试验方法
Thermoplastics pipes for the conveyance of fluids - Resistance to internal pressure - Test method
G33 GB/T 6668 - 1994 聚氯乙烯针织布基发泡人造革
Coated knifed fabrics from expanded PVC
G33 GB/T 6671-2001 热塑性塑料管材纵向回缩率的测定
Thermoplastics pipes - Determination of longitudinal reversion
G33 GB/T 8801 - 1988 硬聚氯乙烯(PVC-U)管件坠落试验方法
Test method for unplasticized(PVC-U)fittings by falling
G33 GB/T 8802-2001 热塑性塑料管材、管件维卡软化温度的测定
Thermoplastics pipes and flmng-Determination of vicat softening temperature
G33 GB/T 8803 - 200l 注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC - C)、丙烯腈一丁二烯一苯乙烯三元共聚物(ABS)和丙烯腈一苯乙烯一丙烯酸盐三元共聚物(ASA)管件 热烘箱试验方法
Injection-moulded unplasticized pob(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acryloni- trile-styrene-acrylester(ASA)fittings-Hot oven test method
G33 GB/T8804.1-2003 热塑性塑料管材拉伸性能测定第l部分：试验方法总则
Thermoplastic pipes-Determination of tensile prop-erties - Part l：General test method
G33 GB/T8804.2-2003 热塑性塑料管材拉伸性能测定第2部分：硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材
Thermoplastic pipes-Determination of tensile properties - Part 2：Pipes made of unplasticized poly(vinylchloride)(PVC-U), chlorinated poly(vinyl chloride)
(PVC-C)and high-impact poly(vinyl chloride)(PVC一Hi)
G33 GB/T8804.3-2003 热塑性塑料管材拉伸性能测定第3部分：聚烯烃管材
Thermoplastic pipes - Determination of tensile properties-Part 3：Polyolefln pipes
G33 GB/T 8805 - 1988 硬质塑料管材弯曲度测量方法
Determination of deflection for rigid plastic pipes
G33 GB/T 8806 - 1988 塑料管材尺寸测量方法
Method for dimension measuring of plastic pipes
G33 GB/T 9042 - 1988 聚乙烯(PE)管材和管件根据聚乙烯公称密度和熔体流动速率命名的方法
Polyethylene(PE)pipes and fittings - Designation of polyethylene based on nominal density and melt flow rate
G33 GB/T 9643 - 1988 聚乙烯(PE)管材和管件熔体流动速率试验方法
Polyethylene(PE)pipes and fittings - Determination of melt flow rate
G33 GB 9644 - 1988 硬聚氯乙烯(PVC-U)饮水管材和管件铅、锡、镉、汞的萃取方法及允许值
Unplasticized polyvinyl chloride(PVC-U)pipes and fittings for drinking water supply-Extractability of lead, tin, cadmium and mercury occurring as impurities-Test method and permitted levels
G33 GB/T 9645 - 1988 硬聚氯乙烯(PVC-U)管材吸水性试验方法
Unplasticized polyvinyl chloride(PVC-U)pipes - Determination of water absorption
G33 GB/T 9646 - 1988 硬聚氯乙烯(PVC-U)管材耐丙酮性试验方法
Unplasticized polyvinyl chloride(PVC-U)pipes - Determination of resistance to acetone
G33 GB/T 9647-2003 热塑性塑料管材环刚度的测定
Thermoplastics pipes-Determination of ring stiffness
G33 GB/T 10002.1 - 1996给水用硬聚氯乙烯(PVC-U)管材
Unplasticized polyvinyl chloride(PVC-U)pipe for water supply
G33 GB/T 10002.2-2003给水用硬聚氯乙烯(PVC-U)管件
Fittings made of unplasticized poly(vinyl chloride) (PVC-U)for water supply
G33 GB/T 10002.3 - 1996埋地排污、废水用硬聚氯乙烯(PVC-U)管材
Unplasticized polyvinyl chloride(PVC-U)pipes for buried drainage and sewerage systems
G33 GB/T 10004 - 1998 耐蒸煮复合膜、袋
Laminated retort film and pouch
G33 GB/T 10005 - 1998 双向拉伸聚丙烯(BOPP)/低密度聚乙烯(LDPE)复合膜、袋
Biaxiany oriented polypropylene laminated polyethy-lene(BOPP/LDPE).films and pouches
G33 GB/T 10006 - 1988 塑料薄膜和薄片摩擦系数测定方法
Plastics-Fihn and sheeting-Determination of the coefficients offriction
G33 GB/T 10007 - 1988 硬质泡沫塑料剪切强度试验方法
Cellular plastics - Determination of shear strength of rigid materials
G33 GB/T 10009 - 1988 丙烯腈一丁二烯-苯乙烯(ABS)塑料挤出板材
Acrylenitrile-butadiene-styrene(ABS)plastics extru-sion plates
G33 GB 10010 - 1988 医用软聚氯乙烯管材
Plasticized polyvinyl chloride(PVC)tubing for medi-cal uses
G33 GB/T 10798-2001 热塑性塑料管材通用壁厚表
Thermoplastics pipes - Universal wall thickness table
G33 GB/T 10805 - 1989 食品包装用硬质聚氯乙烯薄膜
Rigid polyvinyl chloride film for packaging food
G33 GB/T 12024 - 1989 改性聚丙烯层压板材
Modified polypropylene laminating plates
G33 GB/T 12025 - 1989 高密度聚乙烯吹塑薄膜
High density polyethylene blow film
G33 GB/T 12026-2000 热封型双向拉伸聚丙烯薄膜
Biaxially oriented polypropylene film forheat-seal
G33 GB/T 13018 - 1991 聚乙烯(PE)管材外径和壁厚极限偏差
Polyethylene(PE)pipes-Tolerances on outside diameters and wall thicknesses
G33 GB/T 13019 - 1991 聚丙烯(PP)管材外径和壁厚极限偏差
Polypropylene(PP)pipes - Tolerances on outside diameters and wall thicknesses
G33 GB/T 13020 - 1991 硬聚氯乙烯(PVC-U)管材外径和壁厚极限偏差
Unplasticized polyvinyl chloride(PVC-U)pipes - Tolerances on outside diameters and wall thicknesses
G33 GB/T 13021 - 1991 聚乙烯管材和管件炭黑含量的测定热失重法
Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis
G33 GB/T 13022 - 1991 塑料薄膜拉伸性能试验方法
Plastics - Determination of tensile properties of films
G33 GB/T 13519 - 1992 聚乙烯热收缩薄膜
Heat shrinkable polyethylene film
G33 GB/T 13520 - 1992 硬质聚氯乙烯挤出板材
Unplasticized polyvinyl chloride extruded plates
G33 GB/T 13526 - 1992 硬聚氯乙烯(PVC - u)管材二氯甲烷浸渍试验方法
Unplasticized polyvinyl chloride(PVC-U)pipes - Dichloromethane test
G33 GB/T 13527.1 - 1992软聚氯乙烯管(流体输送用)
Plasticized polyvinyl chloride tubing for transport of fluids
G33 GB/T 13527.2 - 1992软聚氯乙烯管(电线绝缘用)
Plasticized polyvinyl chloride tubing for electrical insulation
G33 GB/T 13663-2000 给水用聚乙烯(PE)管材
Polyethylenepes for water supply
G33 GB/T 13664一1992 低压输水灌溉用薄壁硬聚氯乙烯(PVC-U)管材
Thin wall unplasticized polyvinyl chloride(PVC-U) pipes for low-pressure conveyance in irrigation
G33 GB/T 14152-2001 热塑性塑料管材耐外冲击性能试验方法时针旋转法
Thermoplastics pipes - Determination of resistance to external blows.- - Round-the-clock method
G33 GB/T 14153 - 1993 硬质塑料落锤冲击试验方法通则
General test method for impact resistance of rigid plastics by means of falling weight
G33 GB/T 14216 - 1993 塑料膜和片润湿张力试验方法
Plastics - Film and sheeting-Test method for wetting tension
G33 GB/T 15267 - 1994 食品包装用聚氯乙烯硬片、膜
Rigid polyvinyl chloride sheet and film for foodstuff packing
G33 GB 15558.1-2003 燃气用埋地聚乙烯(PE)管道系统第l部分：管材
Buriedpolyethylene(PE)piping systems for the sup-ply of gaseous fuels-Part 1：Pipes
G33 GB/T 15560 - 1995 流体输送用塑料管材液压瞬时爆破和耐压试验方法
Standard test method for short-time hydraulic failure and resistance t0 constant internal pressure of the plastics pipes for the transport Of fluids
G33 GB/T 16800 - 1997 排水用芯层发泡硬聚氯乙烯(PVC-U)管材
Unplasticized polyvinyl chloride(PVC-U)pipes with a cellular core for drainage and sewerage systems
G33 GB/T 17391 - 1998 聚乙烯管材与管件热稳定性试验方法
Test method for thermal stability of polyethylene pipes and fittings
G33 GB/T 17643 - 1998 土工合成材料聚乙烯土工膜
Geosynthetics - Polyethylene geomembrane
G33 GB/T t7688 - 1999 土工合成材料聚氯乙烯土工膜
Geosynthetics - Polyvinyl chloride geomembrane
G33 GB/T 17689 - 1999 土工合成材料塑料土工格栅
Geosynthetics - Plastic geogrid
G33 GB/T 17690 - 1999 土工合成材料塑料扁丝编织土工布
Geosynthetics - Plastic woven film yarn geotextile
G33 GB/T 18042-2000 热塑性塑料管材蠕变比率的试验方法
Thermoplastics pipes - Determination of creep ratio
G33 GB/T 18251-2000 聚烯烃管材、管件和混配料中颜料或炭黑分散的测定方法
Method for the assessment of pigment or carbon black dispersion in polyolefm pipes, fittings and com-pounds
G33 GB/T 18252-2000 塑料管道系统用外推法对热塑性塑料管材长期静液压强度的测定
Plastics piping and ducting systems - Determination Of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
G33 GB/T 18474-2001 交联聚乙烯(PE-X)管材与管件交联度的试验方法
Pipes and fittings made of crosslinked polyethylene (PE-X)一Estimation of the degree of crosslinking by determination of the gel content
G33 GB/T 18475-2001 热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数
Thermoplastics materials for pipes and fittings for pressure applications classification and designation - Overall service(design)coefficient
G33 GB/T 18476-2001 流体输送用聚烯烃管材耐裂纹扩展的测定切口管材裂纹慢速增长的试验方法(切口试验)
Polyolefm pipes for the conveyance of fluids - Deter-ruination of resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test)
G33 GB/T 18477-2001 埋地排水用硬聚氯乙烯(PVC-U)双壁波纹管材
Unplasticized polyvinyl chloride(PVC-U)double wall corrugated pipes for underground soft, waste and drainage
G33 GB/T 18742.1-2002冷热水用聚丙烯管道系统第l部分：总则
Polypropylene piping systems for hot and cold water installations - Part l：General
G33 GB/T 18742。2-2002冷热水用聚丙烯管道系统第2部分：管材
Polypropylenepiping systems for hot and cold water installations - Part 2：Pipes
G33 GB/T 18742.3-2002冷热水用聚丙烯管道系统第3部分：管件
Polypropylenepiping systems for hot and cold water installations - Part 3：fittings
G33 GB/T 18743-2002 流体输送用热塑性塑料管材简支梁冲击试验方法
Thermoplastics pipes for the transport of fluids - Determination of impact by the charpy method
G33 GB/T18744-2002 土工合成材料塑料三维土工网垫
Geosynthetics-Plastic three dimensional erosion control mat
G33 GB/T 18991-2003 冷热水系统用热塑性塑料管材和管件
Thermoplastics pipes and fittings for hot and cold water systems
G33 GB/T 18992.1-2003冷热水用交联聚乙烯(PE-X)管道系统 第l部分：总则
Crosslinked polyethylene(PE-X)piping systems for hot and cold water installations-Part l：General
G33 GB/T 18992.2-2003冷热水用交联聚乙烯(PE-X)管道系统 第2部分：管材
Crosslinked polyethylene(PE-X)piping systems for hot and cold water installations - Part 2：Pipes
G33 GB/T18993.1-2003冷热水用氯化聚氯乙烯(PVC-C)管道系统第l部分：总则
CMorinated poly(vinyl chloride)pipmg system for hot and cold water installations part 1：General
G33 GB/T 18993.2-2003冷热水用氯化聚氯乙烯(PVC-C)管道系统第2部分：管材
Chlorinated poly(vinyl chloride)piping systems for hot and cold water installations-Part 2：Pipes
G33 GB/T 18993.3-2003冷热水用氯化聚氯乙烯(PVC-C)管道系统第3部分：管件
Chlorinated poly(Vinyl chloride)piping systems for hot and cold water installations Part 3：Fittings
G33 GB/T 18997.1-2003铝塑复合压力管第1部分：铝管搭接焊式铝塑管
Polyethylene/Aluminum/Polyethylene composite pressure pipe - Part 1：PE/AL/PE pipe overlap-welded by aluminum pipe
G33 GB/T 18997.2-2003铝塑复合压力管第2部分：铝管对接焊式铝塑管
Polyethylene/Aluminum/Polyethylene composite pressure pipe - Part 2：PE/AL/PE pipe butt-welded by aluminum pipe
G33 GB/T 18998.1-2003工业用氯化聚氯乙烯(PVC-C)管道系统第l部分：总则
Chlorinated poly(vinyl chloride)(PVC-C)piping sys-tems for industrial applications-Part l：General
G33 GB/T 18998.2-2003工业用氯化聚氯乙烯(PVC-C)管道系统第2部分：管材
Chlorinated poly (vinyl chloride)(PVC-C)piping sys-terns for industrial applications - Part 2：Pipes
G33 GB/T 18998.3-2003工业用氯化聚氯乙烯(PVC-C)管道系统第3部分：管件
Chlorinated poly(vinyl chloride)(PVC-C)piping sys-terns for industrial applications - Part 3：Fittings
G33 GB/T 19274-2003 土工合成材料塑料土工格室
Geosynthetics-Plastic geocell
G33 GB/T 19278-2003 热塑性塑料管材、管件及阀门通用术语及其定义
General terms and their definitions of thermoplastic pipes. fittings and valves
G33 GB/T 19279-2003 聚乙烯管材耐慢速裂纹增长锥体试验方法
Polyethylene pipes - Resistance to slow crack growth-Cone test method
G33 GB/T 19280-2003 流体输送用热塑性塑料管材耐快速裂纹扩展(RCP)
的测定小尺寸稳态试验(s4试验)
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propaga-tion(RCP)一Small-scale steady-state test(s4 test)
G33 GB/T 19470-2004 土工合成材料塑料土工网
Geosythetics - Plastic geonet
G33 GB/T 19471.1-2004塑料管道系统硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头偏角密封试验方法
Plastics pipingsystems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly (vinyl chloride)(PVC-U)pipes-Teat method for leaktiglmess under internal pressure and angular deflection
G33 GB/T 19471.2-2004塑料管道系统硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头负压密封试验方法
Plastics piping systems - Elastomeric-sealing-ring-type socket joinks of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes - Test method for leaktightness under negative pressure
G33 GB/T 19472.1-2004埋地用聚乙烯(PE)结构壁管道系统第l部分：聚乙烯双壁波纹管材
Polyethylene structure wall pipeline system for under-ground usage - Part 1：Polyethylene double wall cot-mgated pipes
G33 GB/T 19472.2-2004埋地用聚乙烯(PE)结构壁管道系统第2部分：聚乙烯缠绕结构壁管材
Polyethylene structure-wall piping system for under-ground usage - Part 2：Polyethylene spirally enwound structure-wall pipes
G33 GB/T 19473.1-2004冷热水用聚丁烯(PB)管道系统第l部分：总则
Polybutylene(PB)piping systems for hot and cold water installations - Part l：General
G33 GB/T 19473.2-2004冷热水用聚丁烯(PB)管道系统第2部分：管材
Polybutylene(PB)piping systems for hot and cold water installations - Part 2：Pipes
G33 GB/T 19473.3-2004冷热水用聚丁烯(PB)管道系统第3部分：管件
Polybutylene(PB)piping systems for hot and cold water installations - Part 3：Fittings
G33 GB/T 19603-2004 塑料无滴薄膜无滴性能试验方法
Test method for drop-proof properties of drop-proof plastic films
G34 GB/T 1681 - 1991 硫化橡胶回弹性的测定
Rubber-Determination Of rebound resilience Of vulcanizates
G34 GB/T 1684 - 1985 硫化橡胶短时间静压缩试验方法
Vulcanized rubber-Testing short time static compres-sion
G34 GB/T 1685 - 1982 硫化橡胶在常温和高温下压缩应力松弛的测定
Rubber, vulcanized-Determination of stress relaxation in compressionatnormal and atelevated temperature
G34 GB/T 1688 - 1986 硫化橡胶伸张疲劳的测定
Rubber, vulcanized-Determination of tension fatigue
G34 GB/T 1689 - 1998 硫化橡胶耐磨性能的测定(用阿克隆磨耗机)
Rubber, vulcanized-Determination of abrasion resistance(Akron machine)
G34 GB/T 1693 - 1981 硫化橡胶工频介电常数和介质损耗角正切值的测定方法
Vulcanized rubber-Determination for industrial frequency dielectric constant and dielectric loss angular tangent value
G34 GB/T 1694 - 1981 硫化橡胶高频介电常数和介质损耗角正切值的测定方法
Vulcanized rubber-Test method for HF dielectric constant and dielectric loss angular tangent value
G34 GB/T 1695 - 1981 硫化橡胶工频击穿介电强度和耐电压的测定方法
Vulcanized robber-Test method for industrial frequency puncture voltage and dielectric strength
G34 GB/T 1696-2001 硬质橡胶弯曲强度的测定
Ebonite-Determination of cross breading strength
G34 GB/T 1697-2001 硬质橡胶冲击强度的测定
Ebonite - Determination of impact strength
G34 GB/T 1700-2001 硬质橡胶抗剪切强度的测定
Ebonite-Determination of shearing strength
G34 GB/T 1701-2001 硬质橡胶拉伸强度和拉断伸长率的测定
Ebonite- - Determination of tensile strength and elongation at break
G34 GB/T5576 - 1997 橡胶与胶乳命名法
Rubbers and lattices - Nomenclature
G34 GB 5577 - 1985 合成橡胶牌号规定
Codification of types for synthetic rubbers
G34 GB/T 7042 - 1986 橡胶压缩或剪切性能的测定(扬子尼机械示波器)
Rubber properties determination in compression or shear(Yerzley mechanical oscillograph)
G34 GB/T 7359 - 1999 合成橡胶术语
Synthetic rubbers terminology
G34 GB/T 8656 - 1998 乳液和溶液聚合型苯乙烯一丁二烯橡胶(sBR)评价方法
Styrene-butadiene rubber(SBR)一Emulsion and solution-polymerized types-Evaluation procedures
G34 GB/T 8657-2000 苯乙烯-丁二烯生胶皂和有机酸含量的测定
Rubber raw styrene-butadiene - Determination of soap and organic-acid content
G34 GB/T 8658 - 1998 乳液聚合型苯乙烯一丁二烯橡胶生胶结合苯乙烯含量的测定折光指数法
Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - refractive index method
G34 GB/T 8660 - 1998 溶液聚合型 丁二烯橡胶(BR)评价方法
Rubber, butadiene (BR)一Solution-polymerized types - Evaluation procedures
G34 GB/T 18118-2000 合成生胶中防老剂含量的测定高效液相色谱法
Rubber raw synthetic - Determination of anti-degradants by high-performance liquid chromatography
G34 GB/T 19187-2003 合成生胶抽样检查程序
Sampling procedures for inspection of raw synthetic rubber
G34 GB/T 19188-2003 天然生胶和合成生胶贮存指南
Rubber raw natural and raw synthetic - General guidance on storage
G35 GB 8655 - 1988 丁苯橡胶(SBR)1500
Rubber, styrene-butadiene(SBR)1500
G35 GB/T 8659-2001 丁二烯橡胶(BR)9000
Rubber, butadiene(BR)9000
G35 GB/T 12824-2002 苯乙烯-丁二烯橡胶(sBR)1502
Rubber, styrene-butadiene(SBR)1502
G35 GB/T 14647 - 1993 氯丁橡胶CRl21
Chloroprene rubber CRl21
G35 GB/T 14833 - 1993 塑胶跑道
Synthetic- - - Rubber sports track
G35 GB/T 15257 - 1994 混合调节型氯丁橡胶CR321、CR322
Mixed modulation chloroprene rubber CR321, CR322
G38 GB/T 2790 - 1995 胶粘剂180。剥离强度试验方法挠性材料对刚性材料
Adhesives, 180。peel strength test method for a flexible-bonded-torigld test specimen assembly
G38 GB/T 2791 - 1995 胶粘剂T剥离强度试验方法挠性材料对挠性材料
Adhesives, T peel strength test method for a flexible. to-flexible test specimen assembly
G38 GB/T 2792 - 1998 压敏胶粘带180。剥离强度试验方法
Test method for peel strength of pressure-sensitive tape at 180。angle
G38 GB/T 2793 - 1995 胶粘剂不挥发物含量的测定
Test method for nonvolatile content of adhesives
G38 GB/T 2943 - 1994 胶粘剂术语
Terms of adhesive
G38 GB/T 4850-2002 压敏胶粘带低速解卷强度的测定
Test method for unwinding force of pressure sensitive adhesive tapes at low speed
G38 GB/T 4851-1998 压敏胶粘带持粘性试验方法
Test method for holding power of pressure sensitive adhesive tapes
G38 GB/T 4852-2002 压敏胶粘带初粘性试验方法(滚球法)
Test method for tack of pressure sensitive adhesive tapes by rolling ball
G38 GB/T 6328 - 1999 胶粘剂剪切冲击强度试验方法
Adhesives-Test method for shear impact strength of adhesive bonds
G38 GB/T 6329 - 1996 胶粘剂对接接头拉伸强度的测定
Adhesives - Determination of tensile strength of butt joints
G38 GB/T 7122 - 1996 高强度胶粘剂剥离强度的测定浮辊法
Adhesives-Determination of peel resistance of high-strength adhesive bonds- - Floating roller method
G38 GB/T 7123.1-2002 胶粘剂适用期的测定
Determination for working life of adhesives
G38 GB/T 7123.2-2002 胶粘剂贮存期的测定
Determination for storage life of adhesives
G38 GB/T 7124 - 1986 胶粘剂拉伸剪切强度测定方法(金属对金属)
The method for determination of strength properties of adhesive in shear by tension loading (Metal to metal)
G38 GB/T 7125-1999 压敏胶粘带和胶粘剂带厚度试验方法
Test method for thickness of pressure-sensitive and gummed tapes
G38 GB/T 7749 - 1987 胶粘剂劈裂强度试验方法(金属对金属)
Test method of cleavage strength of adhesive(metal to metal)
G38 GB/T 7750 - 1987 胶粘剂拉伸剪切蠕变性能试验方法(金属对金属)
Test method of creep properties of adhesive in shear by tension loading(metal to metal)
G38 GB/T 7752 - 1987 绝缘胶粘带工频击穿强度试验方法
Test method for electric strength of insulating adhesive tape at power frequency
G38 GB/T 7753 - 1987 压敏胶粘带拉伸性能试验方法
Test method for tensile properties of pressure sensitive adhesive tapes
G38 GB/T 7754-1987 压敏胶粘带剪切强度试验方法(胶面对背面)
Test method for shear strength of pressure sensitive adhesive tapes (adhesive layer to back side of the tape)
G38 GB/T 11175-2002 合成树脂乳液试验方法
Testing methods for synthetic resin emulsions
G38 GB/T 1 1 177 - 1989 无机胶粘剂套接压缩剪切强度试验方法
Testing method for compressive shear strength of dowel joint by inorganic adhesives
G38 GB/T 13353 - 1992 胶粘剂耐化学试剂性能的测定方法金属与金属
Test method for resistance of adhesive bonds to chemical reagents - Metal to metal
G38 GB/T 13354 - 1992 液态胶粘剂密度的测定方法重量杯法
Test method for density of adhesives in fluid form-Method of weight cup
G38 GB/T 13553 - 1996 胶粘剂分类
Classification of adhesives
G38 GB/T 14517 - 1993 绝缘胶粘带工频耐电压试验方法
Test method for dielectric strength of insulating adhesive tape at power frequency
G38 GB/T 14518 - 1993 胶粘剂的pH值测定
Determination of the pH of adhesives
G38 GB/T 14903 - 1994 无机胶粘剂套接扭转剪切强度试验方法
Testing method for torsional shear strength of doedl joint by inorganic adhesives
G38 GB/T 15330 - 1994 压敏胶粘带水渗透率试验方法
Test method for water penetration rate of pressure - sensitive tapes
G38 GB/T 15331 - 1994 压敏胶粘带水蒸汽透过率试验方法sen
Test method for water vapor transmission of pressuresitive tapes
G38 GB/T 15332 - 1994 热熔胶粘剂软化点的测定环球法
Determination of the softening point of hot-melt adhesives-Ball and ring method
G38 GB/T 15333 - 1994 绝缘用胶粘带电腐蚀试验方法
Test method for electrolysis corrosion of electrical insulating adhesive tapes
G38 GB/T 15903 - 1995 压敏胶粘带耐燃性试验方法悬挂法
Test method for flame resistance of pressure-sensitive adhesive tapes
G38 GB/T 16997 - 1997 胶粘剂 主要破坏类型的表示法
Adhesives - Designation of main failure patterns
G38 GB/T 16998 - 1997 热熔胶粘剂热稳定性测定
Hot-melt adhesives-Determination of thermal stability
G38 GB/T 17517 - 1998 胶粘剂压缩剪切强度试验方法木材与木材
Adhesives-Wood to wood adhesive bonds-Determination of shear strength by compression loading
G38 GB/T 17875 - 1999 压敏胶粘带加速老化试验方法
Practice for accelerated among of pressure-sensitive tapes
G38 GB 18583-2001 室内装饰装修材料胶粘剂中有害物质限量
Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives
G38 GB/T 18747.1-2002厌氧胶粘剂扭矩强度的测定(螺纹紧固件)
The determination of torque strength of anaerobic adhesives(Threaded fasteners)
G38 GB/T 18747.2-2002厌氧胶粘剂剪切强度的测定(轴和套环试验法)
The determination of shear strength of anaerobic adhesives using pin-and-collar specimens
G38 GB 19340-2003 鞋和箱包用胶粘剂
Adhesives for footwear and base and bag
G39 GB/T 2794 - 1995 胶粘剂粘度的测定
Determination methods for viscosity of adhesives